Pioneer Lettore DVD DV S969AVi Manuale utente

Lettore DVD

DV-59AVi

DV-S969AVi

DV-S969AVi only

Operating Instructions

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

POWER-CORD PROTECTION — Power-supply

cords should be routed so that they are not

likely to be walked on or pinched by items

placed upon or against them, paying particular

attention to cords at plugs, convenience

receptacles, and the point where they exit from

the product.

OUTDOOR ANTENNA GROUNDING — If an

outside antenna or cable system is connected

to the product, be sure the antenna or cable

system is grounded so as to provide some

protection against voltage surges and built-up

static charges. Article 810 of the National

Electrical Code, ANSI/NFPA 70, provides

information with regard to proper grounding of

the mast and supporting structure, grounding

of the lead-in wire to an antenna discharge unit,

size of grounding conductors, location of

antenna-discharge unit, connection to

DAMAGE REQUIRING SERVICE — Unplug this

product from the wall outlet and refer servicing

to qualified service personnel under the

following conditions:

• When the power-supply cord or plug is

damaged.

• If liquid has been spilled, or objects have fallen

into the product.

• If the product has been exposed to rain or

water.

• If the product does not operate normally by

following the operating instructions. Adjust only

those controls that are covered by the

operating instructions as an improper

adjustment of other controls may result in

damage and will often require extensive work

by a qualified technician to restore the product

to its normal operation.

• If the product has been dropped or damaged in

any way.

• When the product exhibits a distinct change in

performance — this indicates a need for

service.

REPLACEMENT PARTS — When replacement

parts are required, be sure the service

technician has used replacement parts

specified by the manufacturer or have the

same characteristics as the original part.

Unauthorized substitutions may result in fire,

electric shock, or other hazards.

SAFETY CHECK — Upon completion of any

service or repairs to this product, ask the

service technician to perform safety checks to

determine that the product is in proper

operating condition.

grounding electrodes, and requirements for the

grounding electrode. See Figure A.

LIGHTNING — For added protection for this

product during a lightning storm, or when it is

left unattended and unused for long periods of

time, unplug it from the wall outlet and

disconnect the antenna or cable system. This

will prevent damage to the product due to

lightning and power-line surges.

POWER LINES — An outside antenna system

should not be located in the vicinity of

overhead power lines or other electric light or

power circuits, or where it can fall into such

power lines or circuits. When installing an

outside antenna system, extreme care should

be taken to keep from touching such power

lines or circuits as contact with them might be

fatal.

WALL OR CEILING MOUNTING — The product

should not be mounted to a wall or ceiling.

OVERLOADING — Do not overload wall outlets,

extension cords, or integral convenience

receptacles as this can result in a risk of fire or

electric shock.

HEAT — The product should be situated away

from heat sources such as radiators, heat

registers, stoves, or other products (including

amplifiers) that produce heat.

OBJECT AND LIQUID ENTRY — Never push

objects of any kind into this product through

openings as they may touch dangerous voltage

points or short-out parts that could result in a

fire or electric shock. Never spill liquid of any

kind on the product.

SERVICING — Do not attempt to service this

product yourself as opening or removing covers

may expose you to dangerous voltage or other

hazards. Refer all servicing to qualified service

personnel.

ANTENNA

LEAD IN WIRE

GROUND

CLAMP

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

ELECTRIC

SERVICE

EQUIPMENT

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

Fig. A

NEC — NATIONAL ELECTRICAL CODE

[For U.S. model]

IMPORTANT NOTICE

The serial number for this equipment is located

on the rear panel. Please write this serial

number on your enclosed warranty card and

keep it in a secure area. This is for your

security. H006A_En

WARNING: THE APPARATUS IS NOT

WATERPROOFS, TO PREVENT FIRE OR SHOCK

HAZARD, DO NOT EXPOSE THIS APPARUTUS TO

RAIN OR MOISTURE AND DO NOT PUT ANY

WATER SOURCE NEAR THIS APPARATUS, SUCH

AS VASE, FLOWER POT, COSMETICS CONTAINER

AND MEDICINE BOTTLE ETC.

H001A_En

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

[For U.S. model]

[For Canadian model]

CAUTION: TO PREVENT ELECTRIC SHOCK, DO

NOT USE THIS (POLARIZED) PLUG WITH AN

EXTENSION CORD, RECEPTACLE OR OTHER

OUTLET UNLESS THE BLADES CAN BE FULLY

INSERTED TO PREVENT BLADE EXPOSURE.

NOTE: This equipment has been tested and

found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful

interference in a residential installation. This

equipment generates, uses, and can radiate

radio frequency energy and, if not installed

and used in accordance with the instructions,

may cause harmful interference to radio

communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or

ATTENTION: POUR PREVENIR LES CHOCS

ELECTRIQUES NE PAS UTILISER CETTE FICHE

POLARISEE AVEC UN PROLONGATEUR UNE

PRISE DE COURANT OU UNE AUTRE SORTIE

DE COURANT, SAUF SI LES LAMES PEUVENT

ETRE INSEREES A FOND SANS EN LAISSER

AUCUNE PARTIE A DECOUVERT.

H007A_2L

television reception, which can be determined

by turning the equipment off and on, the user

is encouraged to try to correct the interference

by one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the

equipment and receiver.

– Connect the equipment into an outlet on a

circuit different from that to which the

receiver is connected.

[For Canadian model]

This Class B digital apparatus complies with

Canadian ICES-003.

[Pour le modèle Canadien]

Cet appareil numérique de la classe B est

conforme à la norme NMB-003 du Canada.

H009_2L

– Consult the dealer or an experienced radio/

TV technician for help.

H010_En

CAUTION: THE STANDBY/ON BUTTON IS

SECONDARY CONNECTED AND THEREFORE

DOES NOT SEPARATE THE UNIT FROM MAINS

POWER IN STANDBY POSITION. therefore install

the unit suitable places easy to disconnect the

MAINS plug in case of the accident. The MAINS

plug of unit should be unplugged from the wall

socket when left unused for a long period of

Information to User

Alteration or modifications carried out without

appropriate authorization may invalidate the

user's right to operate the equipment. H011_En

time.

H017B_En

[For U.S. model]

CAUTION:

This product satisfies FCC regulations when

shielded cables and connectors are used to

connect the unit to other equipment. To

prevent electromagnetic interference with

electric appliances such as radios and

televisions, use shielded cables and connec-

[Except U.S. and Canadian model]

CAUTION

This product contains a laser diode of higher class

than 1. To ensure continued safety, do not remove

any covers or attempt to gain access to the inside

of the product.

tors for connections.

H012_En

Refer all servicing to qualified personnel.

The following caution label appears on your unit.

Location: rear of the unit

CAUTION

• Use of controls or adjustments or

performance of procedures other than those

specified herein may result in hazardous

radiation exposure.

• The use of optical instruments with this

product will increase eye hazard.

H013_En

H018A_En

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

WARNING: Slot and openings in the cabinet are

provided for ventilation and to ensure reliable

operation of the product and to protect it from

overheating, to prevent fire hazard, the openings

should never be blocked and covered with items,

such as newspapers, table-cloths, curtains, etc. Also

do not put the apparatus on the thick carpet, bed,

[For U.S. and Australian

model]

sofa, or fabric having a thick pile.

H040_En

WARNING:

WARNING: BEFORE PLUGGING IN THE UNIT

FOR THE FIRST TIME, READ THE FOLLOWING

SECTION CAREFULLY. THE VOLTAGE OF THE

AVAILABLE POWER SUPPLY DIFFERS

ACCORDING TO COUNTRY OR REGION. BE SURE

THAT THE POWER SUPPLY VOLTAGE OF THE

AREA WHERE THIS UNIT WILL BE USED MEETS

THE REQUIRED VOLTAGE (E.G., 230V OR 120V)

Handling the cord on this product or cords

associated with accessories sold with the

product will expose you to lead, a chemical

known to the State of California and other

governmental entities to cause cancer and

birth defects or other reproductive harm.

Wash hands after handling

WRITTEN ON THE REAR PANEL.

H041A_En

This product is for general household purposes.

Any failure due to use for other than household

purposes (such as long-term use for business

purposes in a restaurant or use in a car or ship)

and which requires repair will be charged for

WARNING: NO NAKED FLAME SOURCES,

SUCH AS LIGHTED CANDLE, SHOULD BE

PLACED ON THE APPARATUS. IF NAKED FLAME

SOURCES ACCIDENTALLY FALL DOWN, FIRE

SPREAD OVER THE APPARATUS THEN MAY

even during the warranty period.

K041_En

CAUSE FIRE.

H044_En

This product incorporates copyright protection

technology that is protected by method claims

of certain U.S. patents and other intellectual

property rights owned by Macrovision

Corporation and other rights owners. Use of

this copyright protection technology must be

authorized by Macrovision Corporation, and is

intended for home and other limited viewing

uses only unless otherwise authorized by

Macrovision Corporation. Reverse engineering

or disassembly is prohibited.

Operating Environment

H045_En

Operating environment temperature and

humidity:

+5ºC – +35ºC (+41ºF – +95ºF); less than 85%RH

(cooling vents not blocked)

Do not install in the following locations

÷ Location exposed to direct sunlight or strong

÷ artificial light

÷ Location exposed to high humidity, or poorly

ventilated location

On the bonnet of the unit

This product includes FontAvenue^®fonts

licenced by NEC corporation. FontAvenue is

a registered trademark of NEC Corporation.

[For Australian model]

This product complies with the following

i.LINK interface specifications:

1) IEEE Std 1394a-2000, Standard for a

High Performance Serial Bus

2) Audio and Music Data Transmission

Protocol 2.0

[Except U.S., Canadian and Australian model]

Following the standard for AM824

sequence adaptation layers, the product

is compatible with IEC60958 bitstream,

DVD-A and SACD media.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Contents

Remote control . . . . . . . . . . . . . . . . . . . . .30

Setting up the remote to control

your TV . . . . . . . . . . . . . . . . . . . . . . . . . .32

01 Before you start

Features. . . . . . . . . . . . . . . . . . . . . . . . . . . 8

What’s in the box . . . . . . . . . . . . . . . . . . . 10

Putting the batteries in the remote control 10

Using the remote control . . . . . . . . . . . . 10

Disc / content format playback

04 Getting Started

Switching on . . . . . . . . . . . . . . . . . . . . . . .33

Let’s Get Started . . . . . . . . . . . . . . . . . . . .34

Using the on-screen displays. . . . . . . . . . .34

Setting up with the Setup Navigator . . . . .35

Playing discs . . . . . . . . . . . . . . . . . . . . . . .39

Basic playback controls . . . . . . . . . . . . .39

DVD disc menus . . . . . . . . . . . . . . . . . . .40

Video CD/Super VCD PBC menus . . . . . .41

compatibility . . . . . . . . . . . . . . . . . . . . . . 11

General disc compatibility . . . . . . . . . . . 11

CD-R/RW compatibility . . . . . . . . . . . . . 11

DVD-R/RW Compatibility . . . . . . . . . . . 11

Compressed Audio Compatibility. . . . . . 11

PC Created Disc Compatibility. . . . . . . . 12

Titolos, chapters, groups and tracks. . . . . . 12

DVD-Video regions . . . . . . . . . . . . . . . . . . 13

05 Playing discs

Introduction. . . . . . . . . . . . . . . . . . . . . . . .44

Using the Disc Navigator to browse the

02 Connecting up

Rear panel . . . . . . . . . . . . . . . . . . . . . . . . 14

Easy connections . . . . . . . . . . . . . . . . . . . 16

Using other types of video output. . . . . . . 17

Connecting using an S-Video output . . . 17

Connecting using the component video

output . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Connecting using the D1/D2 video

contents of a disc . . . . . . . . . . . . . . . . . . .44

Scanning discs . . . . . . . . . . . . . . . . . . . . .45

Using the Multi Dial. . . . . . . . . . . . . . . . . .46

Playing in slow motion . . . . . . . . . . . . . . .46

Frame advance/frame reverse . . . . . . . . . .47

Looping a section of a disc . . . . . . . . . . . .47

Using repeat play. . . . . . . . . . . . . . . . . . . .48

Using random play . . . . . . . . . . . . . . . . . .48

Creating a program list . . . . . . . . . . . . . . .49

Editing a program list . . . . . . . . . . . . . . .51

Other functions available from the

program menu . . . . . . . . . . . . . . . . . . . .52

Searching a disc . . . . . . . . . . . . . . . . . . . .52

Switching subtitles . . . . . . . . . . . . . . . . . .53

Switching the DVD audio language . . . . . .53

Switching DVD-RW audio channels . . . . .54

Switching DVD-Audio audio channels. . . .54

Switching CD/MP3/Video CD/Super VCD

audio channels . . . . . . . . . . . . . . . . . . . . .54

Switching camera angles . . . . . . . . . . . . .54

Displaying disc information. . . . . . . . . . . .54

output . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Connecting for multichannel surround

sound. . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Connecting using the multichannel

analog outputs. . . . . . . . . . . . . . . . . . . . 19

Connecting using a digital audio

output . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Connecting using i.LINK . . . . . . . . . . . . 21

About i.LINK. . . . . . . . . . . . . . . . . . . . . . . 22

Creating an i.LINK network . . . . . . . . . . 22

Connecting using HDMI. . . . . . . . . . . . . . 24

About HDMI. . . . . . . . . . . . . . . . . . . . . . . 24

Controlling this player from another

Pioneer component . . . . . . . . . . . . . . . . . 25

03 Controls and displays

Front panel. . . . . . . . . . . . . . . . . . . . . . . . 26

About progressive scan video. . . . . . . . . . 28

Compatibility of this unit with

progressive-scan TVs. . . . . . . . . . . . . . . 28

Display. . . . . . . . . . . . . . . . . . . . . . . . . . . 29

06 Audio Settings menu

Note about features in the Audio Settings

menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Audio DRC . . . . . . . . . . . . . . . . . . . . . . . .56

Legato PRO . . . . . . . . . . . . . . . . . . . . . . . .56

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Hi-Bit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Virtual Surround. . . . . . . . . . . . . . . . . . . . 57

Channel Level. . . . . . . . . . . . . . . . . . . . . . 58

Speaker Distance. . . . . . . . . . . . . . . . . . . 59

Channel Level . . . . . . . . . . . . . . . . . . . . .77

i.LINK Setup . . . . . . . . . . . . . . . . . . . . . . .79

Audio Out . . . . . . . . . . . . . . . . . . . . . . . .79

Connections Setup . . . . . . . . . . . . . . . . .79

Auto Select Play . . . . . . . . . . . . . . . . . . .79

DVD-Audio Out . . . . . . . . . . . . . . . . . . . .80

07 The Video Settings menu

Video Adjust. . . . . . . . . . . . . . . . . . . . . . . 60

Creating your own presets . . . . . . . . . . . 60

09 Additional information

Taking care of your player and discs . . . . .81

Handling discs . . . . . . . . . . . . . . . . . . . .81

Storing discs. . . . . . . . . . . . . . . . . . . . . .81

Discs to avoid . . . . . . . . . . . . . . . . . . . . .81

Cleaning the pickup lens. . . . . . . . . . . . .82

Problems with condensation. . . . . . . . . .82

Hints on installation . . . . . . . . . . . . . . . .82

Moving the player . . . . . . . . . . . . . . . . . .82

Power cable caution . . . . . . . . . . . . . . . .82

Screen sizes and disc formats. . . . . . . . . .83

Widescreen TV users. . . . . . . . . . . . . . . .83

Standard TV users. . . . . . . . . . . . . . . . . .83

Resetting the player. . . . . . . . . . . . . . . . . .83

About the audio output settings . . . . . . . .84

About the HDMI output settings . . . . . . . .85

About the i.LINK output settings . . . . . . . .86

Setting the TV System . . . . . . . . . . . . . . . .87

Watching NTSC on a PAL TV. . . . . . . . . .87

Lingua code list . . . . . . . . . . . . . . . . . .88

Country code list . . . . . . . . . . . . . . . . . . . .88

Selecting languages using the language

code list. . . . . . . . . . . . . . . . . . . . . . . . . . .89

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . .89

Troubleshooting . . . . . . . . . . . . . . . . . . . .92

General . . . . . . . . . . . . . . . . . . . . . . . . . .92

DVD/CD/Video CD/Super VCD player . . .93

HDMI troubleshooting . . . . . . . . . . . . . .96

i.LINK-related messages . . . . . . . . . . . . .98

Specifications . . . . . . . . . . . . . . . . . . . . . .99

08 Initial Settings menu

Using the Initial Settings menu . . . . . . . . 63

Digital Audio Out settings . . . . . . . . . . . . 63

Digital Out . . . . . . . . . . . . . . . . . . . . . . . 63

Dolby Digital Out . . . . . . . . . . . . . . . . . . 64

DTS Out. . . . . . . . . . . . . . . . . . . . . . . . . 64

Linear PCM Out . . . . . . . . . . . . . . . . . . . 64

MPEG Out . . . . . . . . . . . . . . . . . . . . . . . 65

Video Output settings. . . . . . . . . . . . . . . . 65

TV Screen . . . . . . . . . . . . . . . . . . . . . . . 65

Component Out . . . . . . . . . . . . . . . . . . . 65

S-Video Out . . . . . . . . . . . . . . . . . . . . . . 66

Still Picture . . . . . . . . . . . . . . . . . . . . . . 66

Lingua settings . . . . . . . . . . . . . . . . . . 66

Audio Lingua . . . . . . . . . . . . . . . . . . 66

Subtitle Lingua . . . . . . . . . . . . . . . . . 67

Auto Lingua . . . . . . . . . . . . . . . . . . . 67

DVD Menu Lingua. . . . . . . . . . . . . . . 68

Subtitle Display . . . . . . . . . . . . . . . . . . . 68

Display settings . . . . . . . . . . . . . . . . . . . . 68

OSD Lingua . . . . . . . . . . . . . . . . . . . 68

On Screen Display . . . . . . . . . . . . . . . . . 68

Angle Indicator . . . . . . . . . . . . . . . . . . . 68

Background. . . . . . . . . . . . . . . . . . . . . . 69

Screen Saver . . . . . . . . . . . . . . . . . . . . . 69

Options . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Parental Lock. . . . . . . . . . . . . . . . . . . . . 69

Bonus Group . . . . . . . . . . . . . . . . . . . . . 71

Auto Disc Menu. . . . . . . . . . . . . . . . . . . 72

Group Playback . . . . . . . . . . . . . . . . . . . 72

DVD Playback Mode . . . . . . . . . . . . . . . 73

SACD Playback . . . . . . . . . . . . . . . . . . . 73

HDMI Settings. . . . . . . . . . . . . . . . . . . . 73

CD Playback . . . . . . . . . . . . . . . . . . . . . 75

DTS Downmix . . . . . . . . . . . . . . . . . . . . 75

Speakers . . . . . . . . . . . . . . . . . . . . . . . . . 75

Audio Output Mode . . . . . . . . . . . . . . . . 75

Speaker Installation . . . . . . . . . . . . . . . . 76

Speaker Distance. . . . . . . . . . . . . . . . . . 77

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Before you start

^CB^hae^pf^teo^{r 1}re you start

Features

Noise Shaped Video (NSV)

Noise Shaped Video processing makes it

possible to display video images at higher

resolutions than would otherwise be possible

using the same video data converter. This is

achieved using the digital processing

techniques of oversampling (to reduce high-

frequency aliasing), and multi-bit Sigma-

Delta processing (to reduce quantization

noise).

HDMI digital interface

The HDMI (High Definition Multimedia

Interface) interconnect provides high quality

digital audio and video, all from a single user-

friendly connector. HDMI is the first

consumer electronics interface to support

uncompressed standard, enhanced, or high-

definition video plus standard to multi-

channel surround sound audio , all using

Pure Audio listening

one interface. You can easily connect to a

HDMI-equipped AV receiver or audiovisual

device for high quality audio and video, and

communication between the video source

and (DTV) players, set-top boxes, and other

The Pure Audio feature allows you to listen to

analog audio sources with the video and

digital outputs disabled, and the front panel

display switched off. This is particularly useful

when listening to high-quality audio formats

such as DVD-Audio and Super Audio CD.

audiovisual devices is also supported.

i.LINK digital interface

DVD-Audio and SACD compatible

Experience the super high-quality audio

performance of DVD-Audio and Super Audio

CD (SACD).

The i.LINK interface makes it possible to

connect this player to an i.LINK-equipped AV

receiver with a single cable and enjoy high

sampling rate (up to 192kHz) PCM

multichannel digital audio from DVD-Audio

and SACD discs, as well as digital audio from

DVD-Video, CD, Video CD/Super VCD and

MP3 discs.

The on-board 24-bit/192kHz DAC means that

this player is fully compatible with high

sampling-rate discs, capable of delivering

exceptional sound quality in terms of dynamic

range, low-level resolution and high-

frequency detail.

In addition to simplified connection, jitterless

audio is possible with Pioneer’s PQLS

(Precision Quartz Lock System) technology

when playing CDs, SACDs and DVD-Audio

discs.

Built-in Dolby Digital and DTS

decoding with multichannel outputs

Other advantages of using i.LINK include

‘smart’ features such as automatic

Logos: 1

This player features multichannel analog

outputs for connection to an AV amplifier to

give you stunning surround sound from Dolby

Digital, DTS and multichannel DVD-Audio

discs.

configuration and automatic function

selection—start playback of a disc and the

receiver automatically changes the input

function to this player.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Before you start

*1 HDMI, the HDMI logo and High-Definition

Multimedia Interface are trademarks or

registered trademarks of HDMI licensing LLC.

Virtual Dolby Digital using SRS

TruSurround

Logo:

*2 It is not possible to output SACD or copy-

controlled DVD-Audio CPPM sources from the

HDMI connection.

SRS TruSurround creates a realistic

surround-sound effect from any Dolby Digital

or Pro Logic encoded source using just two

speakers. SRS TruSurround is a process

certified by Dolby Laboratories for Virtual

Dolby Digital sound. See Virtual Surround on

page 57.

*3 “i.LINK” and the “i.LINK” logo are

trademarks of Sony Corporation.

*4 These features may not be compatible with

all i.LINK-equipped receivers.

*5 Noise Shaped Video is a trademark of

Analog Devices Inc.

PureCinema progressive scan

When connected to a progressive scan-

compatible TV or monitor using the

component video outputs, you can enjoy

extremely stable, flicker free images, with the

same frame refresh rate as the original movie

(see page 28, 60).

*6 Manufactured under license from Dolby

Laboratories. “Dolby” and the double-D symbol

are trademarks of Dolby Laboratories.

*7 “DTS” and “DTS Digital Surround” are

registered trademarks of Digital Theater

Systems, Inc.

*8 TruSurround, SRS and

symbol are

Super Fine Focus digital filter

trademarks of SRS Labs, Inc. TruSurround tech-

nology is incorporated under license from SRS

Labs, Inc.

This improves the quality of the video output

by reducing video noise and increasing the

horizontal resolution to 540 lines.

MP3 compatibility

This player is compatible with CD-R, CD-RW

and CD-ROM discs that contain MP3 audio

tracks. See also Compressed Audio

Compatibility on page 11.

Graphical on-screen displays

Setting up and using your DVD player is made

very easy using the graphical on-screen

displays.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Before you start

What’s in the box

Please confirm that the following accessories

are in the box when you open it.

Incorrect use of batteries can result in

hazards such as leakage and bursting.

Please observe the following:

• Remote control

• AA/R6P dry cell batteries x2

• Stereo audio cable (red/white plugs)

• Video cable (yellow plugs)

• 4-pin S400 i.LINK cable

• Power cable

• Don’t mix new and old batteries together.

• Don’t use different kinds of battery

together—although they may look similar,

different batteries may have different volt-

ages.

• Make sure that the plus and minus ends

of each battery match the indications in

the battery compartment.

• These operating instructions

• Warranty card (DV-59AVi only)

• Remove batteries from equipment that

isn’t going to be used for a month or

more.

Putting the batteries in the

remote control

• When disposing of used batteries, please

comply with governmental regulations or

environmental public instruction’s rules

that apply in your country or area.

Open the battery compartment cover

on the back of the remote control.

H048 En

Using the remote control

Keep in mind the following when using the

remote control:

Insert two AA/R6P batteries into the

battery compartment following the indi-

cations (ꢀ, ꢁ) inside the compartment.

• Make sure that there are no obstacles

between the remote and the remote

sensor on the unit.

• The remote has a range of about 7 meters.

• Remote operation may become unreliable

if strong sunlight or fluorescent light is

shining on the unit’s remote sensor.

• Remote controllers for different devices

can interfere with each other. Avoid using

remotes for other equipment located

close to this unit.

Close the cover.

• Replace the batteries when you notice a

fall off in the operating range of the

remote.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Before you start

CD-R/RW compatibility

Disc / content format

playback compatibility

• This unit will play CD-R and CD-RW discs

recorded in CD Audio or Video CD/Super

VCD format, or as a CD-ROM containing

MP3 audio files. However, any other

content may cause the disc not to play, or

create noise/distortion in the output.

General disc compatibility

This player was designed and engineered to

be compatible with software bearing one or

more of the following logos:

• This unit cannot record CD-R or CD-RW

discs.

• Unfinalized CD-R/RW discs recorded as

CD Audio can be played, but the full Table

of Contents (playing time, etc.) will not be

displayed.

DVD-Audio DVD-Video

DVD-R

CD-R

DVD-RW

CD-RW

DVD-R/RW Compatibility

Audio CD

Video CD

• This unit will play DVD-R/RW discs that

were recorded using the DVD Video

format or Video Recording format.

• This unit cannot record DVD-R/RW discs.

Super VCD^*1

Super Audio CD

• Unfinalized DVD-R/RW discs cannot be

played in this player.

DV-S969Ai only

Other formats, including but not limited to the

following, are not playable in this player:

Compressed Audio Compatibility

• This unit will play CD-ROM discs

containing files saved in the MPEG-1

Audio Layer 3 format (MP3) with a

sampling rate of 44.1 or 48kHz. Incompat-

ible files will not play and UNPLAYABLE

will be displayed on the unit.

Photo CD, DVD-RAM, DVD-ROM, CD-

ROM

Except those that contain MP3 files

formatted as specified in the Compressed

Audio Compatibility section.

• Fixed bit-rate files are recommended.

Variable bit-rate (VBR) files are playable,

but playing time may not be shown

correctly.

DVD-R/RW and CD-R/RW discs (Audio CDs

and Video CD/Super VCDs) recorded using a

DVD recorder, CD recorder or personal

computer may not be playable on this unit.

This may be caused by a number of

possibilities, including but not limited to: the

type of disc used; the type of recording;

damage, dirt or condensation on either the

disc or the player’s pick-up lens. See below for

notes about particular software and formats.

• The CD-ROM used to compile your MP3

files must be ISO 9660 Level 2 compliant.

• CD physical format: Mode1, Mode2 XA

Form1.

• This player only plays tracks that are

named with the file extension “.mp3” or

“.MP3”.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Before you start

• This player is compatible with multi-

session discs, but only plays sessions that

are closed.

Titolos, chapters, groups and

tracks

DVD-Video discs are generally divided into

one or more titles. Titolos may be further subdi-

vided into chapters.

• Use CD-R or CD-RW media for recording

your MP3 files.

• This player can recognize a combined

total of up to 250 tracks and folders. If a

disc containing over 250 tracks/folders is

loaded, only the first 250 tracks/folders

recorded on the disc will be playable.

Titolo 1

Titolo 2

Titolo 3

Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 1 Chapter 2

• Folder and track names (excluding the

“.mp3” extension) are displayed.

DVD-Audio discs are divided into one or more

groups that can each contain a number of

tracks.

• There are many different recording bit-

rates available to encode your MP3 files.

This unit was designed to be compatible

with all of them. Audio encoded at

128Kbps should sound close to regular

CD Audio quality. This player will play

lower bit-rate MP3 tracks, but please note

that the sound quality becomes notice-

ably worse at lower bit-rates.

Group 1

Track 1

Group 2 Group 3

Track 2

Track 3

Track 1

Track 2

CDs, SACDs and Video CD/Super VCDs are

divided into tracks.

PC Created Disc Compatibility

• If you record a disc using a personal

computer, even if it is recorded in a

“compatible format” as listed above, there

will be cases in which the disc may not be

playable in this machine due to the

setting of the application software used to

create the disc. In these particular

Track 1 Track 2 Track 3 Track 4 Track 5 Track 6

CD-ROMs containing MP3 files are divided

into folders and tracks. Folders may also

contain further subfolders.

instances, check with the software

publisher for more detailed information.

• Check the DVD-R/RW or CD-R/RW soft-

ware disc boxes for additional compati-

bility information.

Folder A

Track 1

Folder B Folder C

Track 2

Track 3

Track 1

File 1

File 2

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Before you start

DVD-Video regions

All DVD-Video discs carry a region mark on

the case somewhere that indicates which

region(s) of the world the disc is compatible

with. Your DVD player also has a region mark,

which you can find on the rear panel. Discs

from incompatible regions will not play in this

player. Discs marked ALL will play in any

player.

The diagram below shows the various DVD

regions of the world.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Connecting up

^CC^ho^aptn^ern²ecting up

Rear panel

DV-S969AVi

AUDIO

OUT

AUDIO

OUT

AC IN

DIGITAL AUDIO

OUT

(2ch)

(5.1ch)

SURROUND

^FRONTL

COAXIAL

CENTER

D1/D2

VIDEO OUT

SUB

WOOFER

OPTICAL

S400

HDMI OUT

OUT

DV-S969AVi AC inlet

AC IN

(AUDIO)

VIDEO

OUT

S-VIDEO

OUT

CONTROL

COMPONENT VIDEO OUT

When connecting this player up to your TV, AV

receiver or other components, make sure that

all components are switched off and

unplugged.

AC IN

Connect the supplied power cord here, then

plug into a power outlet. Refer to the illustra-

tion below when doing so to make sure the

neutral and live blades are lined up properly.

AUDIO OUT (2ch)

Two channel analog audio outputs for

connection to your TV, AV receiver or stereo

system (page 16,20).

AC IN

Power cord

LIVE NEUTRAL N : Neutral

: Live

AUDIO OUT (5.1ch)

Multichannel analog audio outputs for

connection to an AV receiver with multi-

channel inputs (page 19).

(AUDIO) – i.LINK connectors

4-pin, S400 i.LINK connectors for connection

to i.LINK-equipped receivers and other

components. Each i.LINK connector acts

simultaneously as both input and output

(page 21).

DIGITAL AUDIO OUT – OPTICAL /

COAXIAL

Digital audio outputs for connection to a

PCM, Dolby Digital, DTS and/or MPEG-

compatible AV receiver (page 20).

HDMI OUT

HDMI output providing a high quality inter-

face for digital audio and video (page 24).

CONTROL IN / OUT

For passing remote control signals to other

Pioneer components (page 25).

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Connecting up

VIDEO OUT (1&2)

11 D1/D2 VIDEO OUT

Standard video output(s) that you can

connect to your TV or AV receiver using the

supplied audio/video cable (page 16).

DV-S969AVi (except Australian model) only

Use to connect this player to a TV with a D

video input (page 18).

S-VIDEO OUT (1&2)

S-Video output(s) that you can use instead of

the VIDEO OUT jacks (page 17).

• You may find it useful to have the manuals

supplied with your other components

handy when connecting this player.

10 COMPONENT VIDEO OUT

High quality video output for connection to a

TV, monitor or AV receiver that has compo-

nent video inputs.

• If you come across any unfamiliar terms

in this section of the manual, take a look

at the Glossary on page 89.

Connect using a commercially available

three-way component video cable.

Be careful to match the colors of the jacks

and cables for correct connection (page 18).

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Connecting up

Easy connections

A/V IN

AUDIO

OUT

AUDIO

OUT

AC IN

DIGITAL AUDIO

OUT

(2ch)

(5.1ch)

SURROUND

^FRONTL

COAXIAL

CENTER

SUB

WOOFER

OPTICAL

S400

OUT

HDMI OUT

(AUDIO)

VIDEO

OUT

S-VIDEO

OUT

CONTROL

COMPONENT VIDEO

To power outlet

The setup described here is a basic setup that

allows you to play discs using just the cables

supplied with the player. In this setup, stereo

audio is played through your TV.

corresponding inputs for correct stereo

sound.

See Using other types of video output below if

you want to use a different type of connection.

• If you need another pair of stereo outputs

(and don’t need to use the multichannel

analog outputs), you can use the AUDIO

OUT (5.1ch) FRONT L / R jacks (page 19).

• This player is equipped with copy protec-

tion technology. Do not connect this

player to your TV via a VCR using AV

cables, as the picture from this player will

not appear properly on your TV. (This

player may also not be compatible with

some combination TV/VCRs for the same

reason; refer to the manufacturer for

more information.)

Connect the supplied AC power cord

to the AC IN inlet, then plug into a power

outlet.

• Do not unplug the player from the power

outlet while it is switched on.

Connect the VIDEO OUT and AUDIO

• Do not plug this player into a switched

power supply found on some amplifiers

and AV receivers.

OUT (2ch) jacks to a set of A/V inputs on

your TV.

Use the supplied red/white stereo audio and

yellow video cable. Make sure you match up

the left and right audio outputs with their

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Connecting up

Connecting using an S-Video output

You can use the S-Video output instead of the

VIDEO OUT jack to connect this player to

your TV (or other equipment).

Using other types of video

output

This player has standard (composite), S-video

and component video outputs (the DV-

S969AVi also has a D video connector for

component video), as well as an HDMI

connector (for digital video/audio).The main

difference between them is the quality of the

picture.

•

Use an S-Video cable (not supplied) to

connect the S-VIDEO OUTPUT to an S-

Video input on your TV, monitor or AV

receiver.

Line up the small triangle above the jack with

the same mark on the plug before plugging

in.

S-video delivers a better picture than standard

composite video, while component video

gives better picture quality still. The variety of

outputs also gives you the flexibility of

connecting your particular equipment using

the best connection type available.

S-VIDEO

INPUT

HDMI provides highest quality digital video

(and audio) using one simple digital connec-

tion, provided your monitor or display is also

equipped with HDMI. See Connecting using

HDMI on page 24 for more on this.

OUT

VIDEO

OUT

S-VIDEO

OUT

CONTROL

COMPONENT VIDEO OUT

• If you connect both S-video jacks, but one

of the connected components is not S1/

S2 compatible, the automatic aspect ratio

switching will not work with either

connected component.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Connecting up

Connecting using the component

video output

• Only NTSC video is output when set to

progressive scan.

You can use the component video output

instead of the standard video out jack to

connect this player to your TV (or other equip-

ment).

• This player is compatible with D1, D2, D3

and D4 inputs. However, when connected

to a D1 connector, only interlace video is

output.

•

Use a component video cable (not

supplied) to connect the COMPONENT

VIDEO OUT jacks to a component video

input on your TV, monitor or AV receiver.

• If you connect one or both of the S-video

jacks and the D video connector, and one

of the connected components is not S1/

S2 compatible, the automatic aspect ratio

switching will not work with any of the

connected components.

COMPONENT

VIDEO IN

AUDIO

OUT

AUDIO

OUT

DIGITAL AUDIO

OUT

(2ch)

(5.1ch)

SURROUND

^FRONTL

COAXIAL

CENTER

SUB

WOOFER

OPTICAL

S400

HDMI OUT

OUT

(AUDIO)

VIDEO

OUT

S-VIDEO

OUT

CONTROL

COMPONENT VIDEO OUT

Connecting using the D1/D2 video

output

DV-S969AVi (except Australian model) only

If your TV is equipped with a D-type video

input, you can use a D video cord to connect

this player to your TV.

D1 VIDEO

INPUT

AUDIO

OUT

AUDIO

OUT

DIGITAL AUDIO

OUT

(2ch)

(5.1ch)

SURROUND

^FRONTL

COAXIAL

CENTER

SUB

WOOFER

OPTICAL

S400

HDMI OUT

OUT

(AUDIO)

VIDEO

OUT

S-VIDEO

OUT

CONTROL

COMPONENT VIDEO OUT

D1/D2

VIDEO OUT

DV-S969AVi

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Connecting up

Connect the AUDIO OUT (5.1ch)

Connecting for multichannel

surround sound

outputs on this player to the multi-

channel audio inputs on your AV receiver.

It’s convenient to use three stereo audio

cables; one for the FRONT, one for the

SURROUND and one for the CENTER and

SUBWOOFER channels.

To enjoy multichannel surround sound from

DVD-Video, DVD-Audio and SACD discs, we

recommend connecting this player to an AV

receiver using the 5.1 channel analog outputs

or the i.LINK connector.

The player also has optical and coaxial digital

outputs should you want to use an external

decoder or the decoder in your AV receiver.

Note that multichannel DVD-Audio and SACD

audio is not output through these jacks, so

this connection should be in addition to,

rather than instead of, a 5.1 channel analog

connection.

AV receiver

MULTI-

CH. INPUTS

AUDIO

OUT

AUDIO

OUT

DIGITAL AUDIO

OUT

(2ch)

(5.1ch)

SURROUND

^FRONTL

COAXIAL

CENTER

You’ll probably also want to connect a video

output to your AV receiver. You can use any of

the video outputs available on this player (the

following illustrations show a standard

(composite) connection).

SUB

WOOFER

OPTICAL

S400

HDMI OUT

OUT

(AUDIO)

VIDEO

OUT

S-VIDEO

OUT

CONTROL

COMPONENT VIDEO OUT

Connect the VIDEO OUTPUT jack on

this player to a video input on your AV

receiver.

Connecting using the multichannel

analog outputs

If your AV receiver has 5.1 channel analog

inputs, we recommend connecting this player

to it using the multichannel analog outputs.

Doing this will ensure that you can enjoy all

kinds of disc, including Dolby Digital and DTS

DVD-Video discs, as well as high sampling

rate and multichannel DVD-Audio and SACD

discs.

VIDEO

INPUT

AV receiver

AUDIO

OUT

(2ch)

AUDIO

OUT

(5.1ch)

DIGITAL AUDIO

OUT

SURROUND

^FRONTL

COAXIAL

CENTER

SUB

WOOFER

OPTICAL

S400

HDMI OUT

OUT

(AUDIO)

VIDEO

OUT

S-VIDEO

OUT

CONTROL

COMPONENT VIDEO OUT

• Alternatively, you can use the S-Video or

component video connections if they’re

available (or D video for the DV-S969AVi).

• In order to be able to hear multichannel

sound from SACDs, DVD-Video and DVD-

Audio discs, you need to set SACD Play-

back to Multi-ch Area, and the Audio

Output Mode to 5.1 Channel (SACD

Playback on page 73 and Audio Output

Mode on page 75).

Connect the AV receiver’s video

output to a video input on your TV.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Connecting up

as this may damage the shutter, the cable

and/or the player.

Coaxial connection: Use a coaxial cable

(similar to the supplied video cable) to

connect the COAXIAL DIGITAL OUT jack to a

coaxial input on your AV receiver.

• You usually have to connect the same

kind of video cable between your DVD

player and AV receiver, and between your

AV receiver and TV.

If you didn’t connect the 5.1 channel

analog outputs, connect the AUDIO OUT

(2ch) jacks on this player to a stereo

analog input on your receiver.

Connecting using a digital audio

output

Connect the optical or coaxial digital outputs

if you want to use an external decoder or the

decoder in your AV receiver.

STEREO

AUDIO IN

AV receiver

To be able to play SACDs and multichannel

DVD-Audio discs, you should also connect

the 5.1 channel analog outputs (Connecting

using the multichannel analog outputs

above).

AUDIO

OUT

AUDIO

OUT

DIGITAL AUDIO

OUT

(2ch)

(5.1ch)

SURROUND

^FRONTL

COAXIAL

CENTER

SUB

WOOFER

OPTICAL

S400

HDMI OUT

OUT

If your AV receiver doesn’t have 5.1 channel

analog inputs, make a stereo analog connec-

tion.

(AUDIO)

VIDEO

OUT

S-VIDEO

OUT

CONTROL

COMPONENT VIDEO OUT

• You can also use the AUDIO OUT 5.1ch

FRONT L/R jacks for the analog audio

connection.

Connect one of the DIGITAL OUT jacks

on this player to a digital input on your AV

receiver.

Connect the VIDEO OUTPUT jack on

DIGITAL IN

OPTICAL

this player to a video input on your AV

receiver.

AV receiver

DIGITAL IN

COAXIAL

VIDEO

INPUT

AV receiver

AUDIO

OUT

DIGITAL AUDIO

OUT

(2ch)

(5.1ch)

SURROUND

^FRONTL

COAXIAL

CENTER

AUDIO

OUT

AUDIO

OUT

SUB

DIGITAL AUDIO

OUT

WOOFER

(2ch)

(5.1ch)

OPTICAL

SURROUND

^FRONTL

S400

COAXIAL

CENTER

HDMI OUT

OUT

(AUDIO)

VIDEO

OUT

S-VIDEO

OUT

CONTROL

COMPONENT VIDEO OUT

SUB

WOOFER

OPTICAL

S400

HDMI OUT

OUT

(AUDIO)

VIDEO

OUT

S-VIDEO

OUT

CONTROL

COMPONENT VIDEO OUT

Optical connection: Use an optical cable

(not supplied) to connect the OPTICAL

DIGITAL OUT jack to an optical input on your

AV receiver.

• Alternatively, you can use the S-Video or

component video connections if they’re

available (or D video for the DV-S969AVi).

• When inserting the plug, the protective

shutter will open and you should hear the

plug click into position when fully

Connect the AV receiver’s video

output to a video input on your TV.

inserted. Take care not to force the plug

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Connecting up

Use the supplied i.LINK cable to

connect one of the i.LINK connectors on

this player to an i.LINK connector on your

AV receiver.

• You usually have to connect the same

kind of video cable between your DVD

player and AV receiver, and between your

AV receiver and TV.

Video

input

i.Link

connector

AV receiver

Connecting using i.LINK

If you have a receiver with an i.LINK

connector, you can connect it to this player

using the supplied i.LINK cable.

AUDIO

OUT

AUDIO

OUT

DIGITAL AUDIO

OUT

(2ch)

(5.1ch)

SURROUND

^FRONTL

COAXIAL

CENTER

SUB

WOOFER

OPTICAL

S400

HDMI OUT

OUT

The i.LINK connector outputs every kind of

digital audio that the player is compatible

with, including DVD-Video, DVD-Audio,

SACD, Video CD/Super VCD, CD and MP3. In

contrast, the optical and coaxial digital

outputs do not output SACD and multi-

channel DVD-Audio.

(AUDIO)

VIDEO

OUT

S-VIDEO

OUT

CONTROL

COMPONENT VIDEO OUT

• The arrow on the cable connector body

should be face down for correct align-

ment with the connector on the player.

When playing DVD-Audio^*1, CD or SACD

discs over i.LINK, the digital audio is jitterless

if the connected receiver is compatible with

PQLS (rate control). See the operating

instructions that came with your receiver for

information on compatibility with this feature.

Connect the VIDEO OUTPUT jack on

*1 Excluding any part of the disc that features

moving video (Video part).

this player to a video input on your AV

receiver.

• The i.LINK connectors on this player do

not output video.

• The diagram shows a standard video

connection, but you can alternatively use

the S-video or component video connec-

tions if they’re available (or D video for the

DV-S969AVi).

• There may be cases where the PQLS/rate

control function and/or the i.LINK audio

does not work properly even when

connected to i.LINK Audio-compatible

equipment.

• Do not disconnect i.LINK cables or switch

off any components connected using

i.LINK while this player is on.

• In order to be able to hear multichannel

sound from SACDs, you need to set SACD

Playback to Multi-ch Area (see SACD

Playback on page 73).

• Copy-protected 96kHz DVD-Video discs

are downsampled to 48kHz when using

the i.LINK connection.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Connecting up

• In order to hear multichannel sound from

DVD-Audio discs, make sure that DVD-

Audio Out is set to 5.1 Channel (see

DVD-Audio Out on page 80).

About i.LINK

i.LINK is a trademark name for IEEE1394, a

high-speed interface for digital audio, video

and other data found on personal computers,

digital camcorders, and other kinds of audio

and audio/visual equipment. A single i.LINK

connector can both send and receive data at

the same time, so only one cable is required

to connect components for two-way commu-

nication.

• To be able to use the Auto Select Play

feature, you must first set it up using the

Auto Select Play menu screen. See Auto

Select Play on page 79.

• When the i.LINK indicator ( ) is lit on the

front panel (see Front panel on page 26),

no audio is output from the other digital or

analog audio jacks. You can switch off the

i.LINK output using the Audio Out menu

(see Audio Out on page 79) if you need to

use the analog and/or optical/coaxial

digital outputs.

“i.LINK” and the “i.LINK” logo are trademarks of

Sony Corporation.

Creating an i.LINK network

Using i.LINK it is possible to chain up to 17

components together so that the digital audio

and control signals from each component is

available to other components in the network.

With the addition of an i.LINK repeater, it’s

possible to connect up to 63 components.

• The front panel i.LINK indicator only lights

when the receiver is on and the input is

set to i.LINK. See also the receiver’s oper-

ating instructions.

i.LINK connectors come in 4-pin and 6-pin

configurations. This player uses the 4-pin

connection, but the two types can be mixed

on a network.

• You can connect several components

together using i.LINK. See Creating an

i.LINK network below.

This player is compatible with i.LINK Audio

components, such as AV receivers. It may not

work properly if connected to i.LINK MPEG-II

TS equipment (such as a digital satellite

tuner), i.LINK DV equipment (such as a DVD

recorder or DV camcorder), or an i.LINK-

equipped personal computer. Check the oper-

ating instructions supplied with your other

i.LINK components for compatibility informa-

tion.

• If you need to use an i.LINK cable other

than the one supplied, please use 4-pin,

S400 cables less than 3.5 meters long.

Although longer ones are available, they

may not work reliably.

Connected components should be DTCP

(Digital Transmission Content Protection)

compliant to be able to play DVD-Video, DVD-

Audio and SACD i.LINK audio. If a connected

component is not DTCP compliant, only CD,

MP3, VCD audio will be output.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Connecting up

When setting up an i.LINK network, it’s impor-

tant that the components form an open ended

chain (fig. 1), or a tree (fig. 2).

When used within an i.LINK network, this

player must be on for the i.LINK connection to

be maintained. Other components in the

network may or may not maintain the connec-

tion in standby (none will when the power is

completely off)—check the operating instruc-

tions supplied with individual components.

Note that the audio may be momentarily inter-

rupted if a component in the i.LINK network is

switched on/off, or its i.LINK connection is

switched on/off.

i.LINK cable

fig. 1

i.LINK cable

fig. 2

The system will not work if the connected

components form a loop. If a loop is detected,

the message LOOP CONNECT shows in the

display. Figs. 3 and 4 show connections that

form a loop.

i.LINK cable

fig. 3

i.LINK cable

fig. 4

Another consideration when connecting

i.LINK devices is the speed of the interface. At

present there are three speeds; S100

(slowest), S200 and S400 (fastest). This player

uses the S400 type. Although you can use

components with different speeds together,

we recommend connecting slower speed

components at the edge of the network if

possible (shown by the shaded boxes in figs.

1 and 2). This will keep the network free of

bottlenecks.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Connecting up

HDMI or DVI appears in the front panel

display according to the compatibility of the

component connected.

Connecting using HDMI

If you have a HDMI or DVI-equipped monitor

or display, you can connect it to this player

using a commercially available HDMI cable.

The HDMI connector outputs uncompressed

digital video, as well as almost every kind of

digital audio that the player is compatible

with, including DVD-Video, DVD-Audio (see

below for limitations), Video CD/Super VCD,

CD and MP3.

• An HDMI connection can only be made

with DVI-equipped components compat-

ible with both DVI and High Bandwidth

Digital Content Protection (HDCP). If you

choose to connect to a DVI connector, you

will need a separate adaptor

Use an HDMI cable to connect the

HDMI OUT interconnect on this player to

an HDMI interconnect on a HDMI-compat-

ible monitor.

(DVIꢀHDMI) to do so. A DVI/HDCP

connection, however, does not support

audio signals. Consult your local audio

dealer for more information.

• When you change the component

connected to the HDMI output, you will

also need to change the HDMI settings to

match the new component (see HDMI

Settings on page 73 to do this). However,

the settings for each component are then

stored in memory (for up to 5 compo-

nents).

HDMI

connector

HDMI-compatible display

AUDIO

OUT

AUDIO

OUT

DIGITAL AUDIO

OUT

(2ch)

(5.1ch)

SURROUND

^FRONTL

COAXIAL

CENTER

SUB

WOOFER

OPTICAL

S400

HDMI OUT

OUT

• The HDMI connection is compatible with

44.1/48kHz, 16/20/24 bit 2 channel linear

PCM signals, as well as Dolby Digital, DTS

and MPEG audio bitstream.

(AUDIO)

VIDEO

OUT

S-VIDEO

OUT

CONTROL

COMPONENT VIDEO OUT

• The arrow on the cable connector body

should be face up for correct alignment

with the connector on the player.

• It is not possible to output SACD or copy-

controlled DVD-Audio CPPM sources

from the HDMI connection.

About HDMI

HDMI (High Definition Multimedia Interface)

supports both video and audio on a single

digital connection for use with DVD players,

DTV, set-top boxes, and other AV devices.

HDMI was developed to provide the technolo-

gies of High Bandwidth Digital Content

Protection (HDCP) as well as Digital Visual

Interface (DVI) in one specification. HDCP is

used to protect digital content transmitted

and received by DVI-compliant displays.

When you first switch on the player, you will

see the HDMI settings menu appear on your

monitor or display. From here you can select

the resolution, aspect ratio and audio

settings, as well as adjust the video presenta-

tion to your liking. For more on these settings

see HDMI Settings on page 73.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Connecting up

HDMI has the capability to support standard,

enhanced, or high-definition video plus stan-

dard to multi-channel surround-sound audio.

HDMI features include uncompressed digital

video, a bandwidth of up to 5 gigabytes per

second, one connector (instead of several

cables and connectors), and communication

between the AV source and AV devices such

as DTVs.

• My VCR is already connected to my TV, so

there aren’t any spare inputs. What should

I do?

If all your TV’s inputs are already in use,

you can buy a video input selector from an

electronics store, which effectively gives

you more inputs.

• My TV only has one input for the sound.

What should I plug it into?

HDMI, the HDMI logo and High-Definition

Multimedia Interface are trademarks or regis-

tered trademarks of HDMI licensing LLC.

If you don’t mind mono sound, you can

buy a stereo RCA-to-mono RCA cable

from an electronics store. Connect the

stereo end to this player and the mono

end to your TV.

Controlling this player from

another Pioneer component

If you want stereo sound, connect this

player to your amplifier or stereo system

using a stereo audio cable.

This player has SR jacks which allow you to

use the remote sensor on one Pioneer compo-

nent to control another.

• I connected the DVD player to my AV

receiver, and although the sound is fine,

there’s no picture. What did I do wrong?

Use a mini-jack plug to connect the

CONTROL OUT of one component to the

CONTROL IN of another. In this way you can

daisy-chain several components together.

Make sure that the type of video connec-

tion from the DVD player to your AV

receiver is the same as that from the

receiver to your TV. Most AV receivers

won’t convert from one kind of connection

to another.

CONTROL

OUT

Pioneer AV receiver

AC IN

OUT

VIDEO

OUT

S-VIDEO

OUT

CONTROL

COMPONENT VIDEO OUT

CONTROL

Pioneer CD player, etc.

• My TV doesn’t have any inputs to connect

the DVD player. How can I watch DVDs?

Unfortunately, if your TV has no inputs you

can’t use this player with it.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Controls and displays

^CC^hao^ptn^ert³rols and displays

The following illustrations show the DV-59AVi,

but controls and displays for the DV-S969AVi

are the same except where indicated.

Front panel

3 4

OPEN/CLOSE

)

AUDIO/VIDEO

STANDBY/ON

HDMI

PROGRESSIVE PURE AUDIO

⁄›

‹

COMPATIBLE

12 11

• DV-S969AVi only – This player is compat-

ible with both PAL and NTSC progressive

scan formats. However, your TV must also

be progressive scan compatible to take

advantage of this feature.

ꢂ STANDBY/ON (DV-59AVi)

Press to switch the player into standby.

POWER (DV-S969AVi)

Press to switch the player on or off (the

player can be put into standby using the

remote control; the STANDBY indicator

above the button lights when in standby).

PURE AUDIO button/indicator

When the player is stopped, press to switch

off/on the front panel display and disable the

video and digital outputs*. Use this when you

want to hear audio from the analog outputs

with no interference from other signals (when

listening to a DVD-Audio disc, for example).

The indicator lights when the Pure Audio

feature is switched on.

i.LINK indicator

Lights when this player is recognized by

another i.LINK compatible component.

HDMI indicator

Lights when this player is recognized by

another HDMl or DVI/HDCP compatible

component.

* These include i.LINK, HDMI, and the

coaxial and optical digital outputs.

PROGRESSIVE button/indicator

Press to switch the component video output

mode between progressive and interlace. The

indicator lights in progressive scan mode.

more on HDMI compatibility.

• Why can’t I hear SACD audio through the

optical/coaxial digital outputs or the HDMI

interface?

Make sure the resolution on this player

matches that of the component you have

connected using HDMI. See HDMI

Settings on page 73 to change the HDMI

resolution.

SACD audio is only available through the

analog outputs and the i.LINK connector.

This is not a malfunction. Also, some

DVD-Audio discs only output audio

through the analog outputs and i.LINK

connector.

• Is it better to listen to DVD-Audio discs

through the analog outputs?

Some DVD-Audio discs do not output

anything through the digital outputs, and

multichannel discs are downmixed to

stereo for the optical and coaxial digital

outputs. In addition, high sampling rate

DVD-Audio discs (96kHz or higher) auto-

matically downsample audio output from

the optical/coaxial digital outputs.

Using the multichannel analog audio

outputs or the i.LINK connector for DVD-

Audio have none of these limitations.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Playing discs

^CP^hl^aa^ptey^ri⁵ng discs

Press HOME MENU and select ‘Disc

Introduction

Navigator’ from the on-screen display.

Alternatively, if a DVD-RW, CD, Video CD/

Super VCD or MP3 disc is loaded, you can

press MENU, which takes you straight to the

Disc Navigator screen.

Most of the features described in this chapter

make use of on-screen displays. For an expla-

nation of how to navigate these, see Using the

on-screen displays on page 34.

Many of the functions covered in this chapter

apply to DVD and SACD discs, Video CD/

Super VCDs, CDs and MP3 discs, although

the exact operation of some varies slightly

with the kind of disc loaded.

HOME MENU

DVD

Audio Settings

Play Mode

Video Adjust

Disc Navigator

Setup Navigator

Some DVD discs restrict the use of some

functions (random or repeat, for example).

This is not a malfunction.

Initial Settings

When playing Video CD/Super VCDs, some of

the functions are not available during PBC

playback. If you want to use them, start the

disc playing using a number button to select

a track.

Select what you want to play.

Depending on the type of disc you have

loaded, the Disc Navigator looks slightly

different.

For DVD-Video discs select a title, or a chapter

within a title.

Using the Disc Navigator to

browse the contents of a disc

Disc Navigator

Titolo 1-10

Chapter 1-3

DVD

Chapter 001

Chapter 002

Chapter 003

Use the Disc Navigator to browse through the

contents of a disc to find the part you want to

play. You can use the Disc Navigator when a

disc is playing or stopped.

Titolo 01

Titolo 02

Titolo 03

Titolo 04

Titolo 05

Titolo 06

Titolo 07

Titolo 08

For DVD-Audio discs select a group, or a track

within a group.

• It’s not possible to use the Disc Navigator

when playing a Video CD/Super VCD in

PBC mode, or when a DVD disc menu is

displayed.

Disc Navigator

Group(1-03)

Track (1-36)

Track 01

Track 02

Track 03

Track 04

Track 05

Track 06

Track 07

Track 08

Group 01

Group 02

Group 03

DVD-Audio

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Playing discs

For SACD discs select a track within the

current playback area.

Disc Navigator

Folder 1-17

Track 1-10

MP3

001. ACP

002. Nth Degree

003. Pfeuti

001. Gravity deluxe

002.Tesla's patent

003. Border dispute

004. Delayed by rain

005. Accident incident

006. Pigeon post

Disc Navigator

004. Live

Track(1-014)

Track 001

Track 002

Track 003

Track 004

Track 005

Track 006

Track 007

Track 008

Total Time 73.05

005. Glitch music

006. CodHead

007.Thermo

008. Missing Man

2ch Area

007. Outernational

008. Vacuum tube

Playback starts after you press ENTER.

For a VR mode DVD-RW disc select between

the Playlist and Original areas of the disc, or a

title. Use the joystick (right) to preview the

title.

• The Disc Navigator is not available unless

there is a disc loaded.

• Another way to find a particular place on

a disc is to use one of the search modes.

See Searching a disc on page 52.

• It’s not possible to switch between Orig-

inal and Playlist during playback.

• Not all DVD-RW discs have a Playlist.

Disc Navigator

Scanning discs

Titolo(1-03)

DVD-RW

Original

01. 3/31 FIRST LEAGUE

02. 4/28 SECOND LEAGUE

03. 4/29 FINAL ROUND

You can fast-scan discs forward or backward

at various speeds.

Play List

During playback, press ꢊ or ꢇ to

start scanning.

Press repeatedly to increase the scan-

For CDs and Video CD/Super VCDs select a

track (the screen below shows a CD loaded).

ning speed.

• MP3s can only be scanned at one speed.

• The scanning speed is shown on-screen.

Disc Navigator

Track 1-10

To resume normal playback, press ꢅ

(play).

Track 01

Track 02

Track 03

Track 04

Track 05

Track 06

Track 07

Track 08

• Sound can be heard while scanning

SACDs, audio CDs, and MP3 discs.

For MP3 discs select a folder, or a track within

a folder. (Note that if a folder or track name

contains accented or non-roman characters,

they may show up with generic names –

F_033, T_035, etc.).

• There is no sound while scanning DVDs

and Video CD/Super VCDs, and no subti-

tles while scanning DVD-Video.

• Depending on the disc, normal playback

may automatically resume when a new

chapter is reached on a DVD-Video disc.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Playing discs

Using the Multi Dial

Playing in slow motion

You can use the Multi Dial to control fast and

slow motion scanning and frame advance of

DVD-Video, DVD-R/RW and Video CD/Super

VCDs.

You can play DVD-Videos, DVD-R/RW and

Video CD/Super VCDs at four different

forward slow motion speeds, and DVD-

Videos, DVD-R/RW also at two reverse

speeds.

When scanning, no audio is output, even

when the scanning speed is 1/1 (normal play-

back speed).

During playback, press ꢆ (pause).

Press and hold ꢌ/ꢍ or ꢎ/ꢏ until

•

To start scanning playback at 1/16

slow motion playback starts.

• The slow motion speed is shown on-

screen.

speed, turn the MULTI DIAL (clockwise for

forward; anti-clockwise for reverse)

during playback.

• Turn the MULTI DIAL in the same direc-

tion to increase the scan speed—the

speed is indicated at the top left of the

screen.

• There is no sound during slow motion

playback.

Press repeatedly to change the slow

motion speed.

• The slow motion speed is displayed on-

screen.

• Turn in the opposite direction to slow the

scan speed/reverse direction.

To resume normal playback, press ꢅ

•

To start high-speed scanning, turn the

(play).

MULTI DIAL quickly (clockwise for

forward; anti-clockwise for reverse)

during playback.

• Change the speed/direction in the same

way as above.

• You can’t use slow motion playback with

some titles on some DVDs.

• To resume normal playback, press ꢅ.

• Video CD/Super VCD only supports

forward slow motion playback.

•

To start manual scanning, press JOG

(JOG MODE), then use the MULTI DIAL to

advance frames in either direction.

• The picture quality during slow motion

playback is not as good as during normal

playback.

•

To switch off jog mode, press JOG

(JOG MODE) again. The picture remains

paused until you restart playback.

• To resume normal playback, press ꢅ.

• Depending on the disc, normal playback

may automatically resume when a new

chapter is reached.

• For DVD-Audio discs featuring browsable

pictures (see the Glossary on page 89),

press ꢌ/ꢍ /ꢎ/ꢏ to view the previous/

next picture.

• You can scan Video CD/Super VCDs in the

same way as DVD-Video discs (see

above). However, reverse slow-motion

scanning is not possible, and there are

just two fast scanning speeds.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Playing discs

During playback, press PLAY MODE

Frame advance/frame reverse

and select ‘A-B Repeat’ from the list of

functions on the left.

You can advance or back up DVD-Video or

DVD-RW discs frame-by-frame. With Video

CD/Super VCDs, you can only use frame

advance.

Play Mode

A-B Repeat

Repeat

A(Start Point)

B(End Point)

Off

During playback, press ꢆ (pause).

Random

Program

Press ꢌ/ꢍ or ꢎ/ꢏ to reverse or

Search Mode

advance a frame at a time.

To resume normal playback, press ꢅ

(play).

Press ENTER on ‘A(Start Point)’ to set

the loop start point.

Play Mode

• The picture quality when using frame

reverse is not as good as frame advance.

A-B Repeat

Repeat

A(Start Point)

B(End Point)

Off

Random

• Depending on the disc, normal playback

may automatically resume when a new

chapter is reached.

Program

Search Mode

• When changing direction of a DVD-Video

disc, the picture may ‘move’ in an unex-

pected way. This is not a malfunction.

Press ENTER on ‘B(End Point)’ to set

the loop end point.

• For DVD-Audio discs featuring browsable

pictures (see the Glossary on page 89),

press ꢌ/ꢍ /ꢎ/ꢏ to view the previous/

next picture.

Play Mode

A-B Repeat

Repeat

A(Start Point)

B(End Point)

Off

Random

Program

Search Mode

Looping a section of a disc

The A-B Repeat function allows you to specify

two points (A and B) within a track (DVD-

Audio, CD and Video CD) or title (DVD-Video

and DVD-RW) that form a loop which is

played over and over.

After pressing ENTER, playback jumps back

to the start point and plays the loop.

To resume normal playback, press

CLEAR or select ‘Off’ from the menu.

• A-B Repeat is not available with SACDs,

MP3s, Super VCDs or Video CDs in PBC

mode, or while a DVD disc menu is being

displayed.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Playing discs

DVD-Audio discs

• Group Repeat

• Track Repeat

• Repeat Off

Using repeat play

There are various repeat play options,

depending on the kind of disc loaded. It’s also

possible to use repeat play together with

program play to repeat the tracks/chapters in

the program list (see Creating a program list

on page 49).

SACD, CD and Video CD/Super VCD discs

• Disc Repeat

• Track Repeat

• Repeat Off

MP3 discs

• Repeat play is not available with Video

CD/Super VCDs in PBC mode, or while a

DVD disc menu is being displayed.

• Disc Repeat

• Folder Repeat

• Track Repeat

• Repeat Off

During playback, press PLAY MODE

and select ‘Repeat’ from the list of func-

tions on the left.

Play Mode

A-B Repeat

Repeat

Titolo Repeat

Chapter Repeat

Repeat Off

• If you’ve made a program list, the

Program Repeat option also appears as

a repeat option.

Random

Program

Search Mode

• To stop the disc and cancel repeat play,

press ꢄ (stop).

• You can also cancel repeat play without

stopping playback by pressing CLEAR.

The disc will play to the end, then stop.

Select a repeat play option.

The repeat play options available depend on

the type of disc loaded. The screen below

appears when a DVD-Video disc is loaded.

Play Mode

• You can’t use repeat and random play at

the same time.

A-B Repeat

Repeat

Titolo Repeat

Chapter Repeat

Repeat Off

Random

• If you switch camera angle during repeat

play, repeat play is canceled.

Program

Search Mode

Using random play

DVD-Video and DVD-RW discs

• Titolo Repeat

Use the random play function to play titles or

chapters (DVD-Video), groups or tracks (DVD-

Audio), or tracks (CD, Video CD/Super VCD

and MP3 discs) in a random order.

• Chapter Repeat

• Repeat Off

You can set the random play option when a

disc is playing or stopped.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Playing discs

• You can’t use random play with SACDs,

DVD-RWs, Video CD/Super VCDs playing

in PBC mode, or while a DVD disc menu

is being displayed.

• To stop the disc and cancel random play-

back, press ꢄ (stop).

• You can also cancel random playback

without stopping the disc by pressing

CLEAR. The disc will play to the end, then

stop.

Press PLAY MODE and select ‘Random’

from the list of functions on the left.

• During random play, the ꢉ and ꢈ

buttons function a little differently to

normal: ꢉ returns to the beginning of

the current track/chapter. You can't go

back further than this. ꢈ selects

another track/chapter at random from

those remaining.

Play Mode

A-B Repeat

Repeat

Random Titolo

Random Chapter

Random Off

Random

Program

Search Mode

• You can't use random play together with

program or repeat play.

Select a random play option.

The random play options available depend on

the type of disc loaded. The screen below

appears when a DVD-Video disc is loaded.

Creating a program list

This feature lets you program the play order of

titles/group/chapters/folders/tracks on a disc.

Play Mode

A-B Repeat

Repeat

Random Titolo

Random Chapter

Random Off

Random

Program

• Program play is not available with DVD-

RWs, Video CD/Super VCDs playing in

PBC mode, or while a DVD disc menu is

being displayed.

Search Mode

DVD-Video discs

• Random Titolo

• Random Chapter

• Random Off

Press PLAY MODE and select ‘Program’

from the list of functions on the left.

Play Mode

DVD-Audio discs

• Random Group

• Random Track

• Random Off

A-B Repeat

Repeat

Create/Edit

Playback Start

Playback Stop

Program Delete

Program Memory

Random

Program

Search Mode

ꢅ Off

MP3, CD and Video CD/Super VCD discs

• On

• Off

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Playing discs

Select ‘Create/Edit’ from the list of

• To add a chapter, first highlight the title,

then move the cursor right and select a

chapter from the list.

program options.

Play Mode

Program

A-B Repeat

Repeat

Create/Edit

Program Step

Titolo 1-38

Chapter 1-4

Playback Start

Playback Stop

Program Delete

Program Memory

01. 01-003

02.

Titolo 01

Titolo 02

Titolo 03

Titolo 04

Titolo 05

Titolo 06

Titolo 07

Titolo 08

Chapter 001

Chapter 002

Chapter 003

Chapter 004

Random

Program

03.

Search Mode

ꢅ Off

04.

05.

06.

07.

08.

The Program edit screen that appears

depends on the kind of disc loaded.

For a DVD-Audio disc, you can add a whole

group, or a track within a group to the

program list.

On the left side is the program list, then to the

right is a list of titles (if a DVD-Video disc is

loaded), groups (for DVD-Audio), tracks (for

SACDs, CDs and Video CD/Super VCDs), or

folders (for MP3 discs). On the far right is a list

of chapters (for DVD-Video) or tracks (for

DVD-Audio and MP3).

• To add a group, select the group.

Program

Program Step

Track(1-36)

Track 01

Track 02

Track 03

Track 04

Track 05

Track 06

Track 07

Track 08

Group(1-03)

Group 01

Group 02

Group 03

01. 01

02.

Select a title, chapter, group, folder or

03.

04.

track for the current step in the program

list.

For a DVD disc, you can add a whole title, or a

chapter within a title to the program list.

05.

06.

07.

08.

• To add a title, select the title.

• To add a track, first highlight the group,

then move the cursor right and select a

track from the list.

Program

Program Step

Titolo 1~38

Chapter 1~4

01. 01

02.

Titolo 01

Titolo 02

Titolo 03

Titolo 04

Titolo 05

Titolo 06

Titolo 07

Titolo 08

Chapter 001

Chapter 002

Chapter 003

Chapter 004

Program

03.

Program Step

04.

Group(1-03)

Group 01

Group 02

Group 03

Track(1-36)

Track 01

Track 02

Track 03

Track 04

Track 05

Track 06

Track 07

Track 08

05.

01. 01-003

02.

06.

07.

03.

08.

04.

05.

06.

07.

08.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Playing discs

For SACD, CD or Video CD/Super VCD, select

a track to add to the program list. (The screen

below shows a CD loaded.)

To play the program list, press ꢅ

(play).

Program play remains active until you turn off

program play (see below), erase the program

list (see below), eject the disc or switch off the

player.

Program

Program Step

Track 1~12

01. 04

02.

Track 01

Track 02

Track 03

Track 04

Track 05

Track 06

Track 07

Track 08

03.

04.

05.

06.

07.

• To exit the program edit screen without

starting playback, press PLAY MODE or

HOME MENU. (Don’t press RETURN—

your program list will be lost.)

08.

For an MP3 disc, you can add a whole folder,

or a track within a folder to the program list.

• During program play, press ꢈto skip to

• To add a folder, select the folder.

the next program step.

• Press CLEAR during playback (though not

if the program list OSD is displayed) to

switch off program play. Press while

stopped to erase the program list.

Program

Program Step

Folder 1-6

Track 1-10

01. 001

02.

001. ACP

001. Gravity deluxe

002.Tesla's patent

003. Border dispute

004. Delayed by rain

005. Accident incident

006. Pigeon post

002. Nth Degree

003. Pfeuti

03.

04.

004. Live

05.

005. Glitch music

006. CodHead

06.

Editing a program list

After creating a program list, you can add,

delete and change steps.

07.

007. Outernational

008. Vacuum tube

08.

Press PLAY MODE and select ‘Program’

• To add a track, first find the folder, then

move the cursor right and select a track

name from the list.

from the list of functions on the left.

Select ‘Create/Edit’ from the list of

program options.

Program

Program Step

Folder 1-6

Track 1-10

To clear a step, highlight the step

01. 001-003

001. ACP

001. Gravity deluxe

002.Tesla's patent

003. Border dispute

004. Delayed by rain

005. Accident incident

006. Pigeon post

number and press CLEAR.

02.

03.

04.

05.

06.

07.

08.

002. Nth Degree

003. Pfeuti

004. Live

To insert a step in the middle of the

005. Glitch music

006. CodHead

program list, highlight the step where you

want the new step to appear, then select

a title/group/chapter/folder/track to add.

After pressing ENTER, the new step is

inserted into the list.

007. Outernational

008. Vacuum tube

After pressing ENTER to select the title/group/

chapter/folder/track, the step number auto-

matically moves down one.

To add a step to the end of the

program list, highlight the next free step

then select a title/group/chapter/folder/

track to add.

list.

Repeat step 3 to build up a program

A program list can contain up to 24 titles/

chapters/groups/folders/tracks.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Playing discs

• To exit the program edit screen without

starting playback, press PLAY MODE or

HOME MENU.

• After saving a program list using the

Program Memory feature, whenever you

load that disc, the program list is auto-

matically recalled and program play

switched on.

• If you want to exit the program edit screen

without saving the changes you made,

press RETURN.

• You can save program lists for up to 24

discs. After that, the oldest one is

replaced with the new one saved.

Other functions available from the

program menu

Searching a disc

As well as creating and editing a program list,

you can start and stop program play, erase

the program list, and memorize a DVD

program list from the Program menu.

Using the search mode function from the Play

Mode menu you can quickly jump to a partic-

ular part of the disc that you’re watching or

listening to.

Press PLAY MODE and select ‘Program’

from the list of functions on the left.

Press PLAY MODE and select ‘Search

Mode’ from the list of functions on the

left.

Play Mode

The search options that appear depend on the

kind of disc loaded. The screen below shows

the DVD-Video search options.

A-B Repeat

Repeat

Create/Edit

Playback Start

Playback Stop

Program Delete

Program Memory

Random

Program

Search Mode

ꢅ Off

Play Mode

A-B Repeat

Repeat

Titolo Search

Chapter Search

Time Search

Select a program play function.

• Create/Edit – See Creating a program list

on page 49

Random

Program

Search Mode

• Playback Start – Starts playback of a

saved program list

Select a search mode.

• Playback Stop – Turns off program play,

but does not erase the program list

Use the number buttons to enter a

title, group, chapter, folder or track

number, or a time.

• Program Delete – Erases the program

list and turns off program play

• Program Memory (DVD-Video only) –

Select On to save the program list for the

disc loaded. (Select Off to cancel the

program memory for the disc loaded)

Play Mode

A-B Repeat

Repeat

Titolo Search

Input Chapter

Chapter Search

Time Search

Random

Program

Search Mode

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Playing discs

• For a time search, enter the number of

minutes and seconds into the currently

playing title (DVD-Video/DVD-RW) you

want playback to resume from. For

example, press 4, 5, 0, 0 to have playback

start from 45 minutes into the disc. For 1

hour, 20 minutes and 30 seconds, press 8,

0, 3, 0.

• While the above display is showing, you

can also use the joystick (up/down) and

ENTER to select a subtitle language from

a drop-down menu.

Subtitle

Off

1. IT

2. French

3. German

4. Italian

• Some DVD-Audio discs feature pages of

browsable pictures. Enter the page

number you want.

Press ENTER to start playback.

• Some discs only allow you to change

subtitle language from the disc menu.

Press TOP MENU to access.

• You can only use time search with Video

CDs and DVD-Video discs.

• To set subtitle preferences, see Subtitle

Lingua on page 67.

• Discs must be playing in order to use time

search (except Video CD).

• Search functions are not available with

Video CD in PBC mode (start non-PBC

playback by stopping playback, then

pressing ꢈ, then ꢅ (play)).

Switching the DVD audio

language

When playing a DVD disc recorded with

dialog in two or more languages, you can

switch audio language during playback.

• You can often select what you want to

watch from a DVD disc menu. See also

DVD disc menus on page 40.

Press AUDIO repeatedly to select an

audio language option.

Switching subtitles

Current /Total

Some DVD discs have subtitles in one or

more languages; the disc box will usually tell

you which subtitle languages are available.

You can switch subtitle language during play-

back.

Audio

1/2

French

Dolby Digital 3/2.1CH

• With some discs, while the above display

is showing, you can also use the joystick

(up/down) and ENTER to select an audio

language from a drop-down menu.

Press SUBTITLE repeatedly to select a

subtitle option.

Audio

French

Dolby Digital 3/2.1CH

Current / Total

Subtitle

1/2

1. IT

2. French

3. German

4. Italian

Dolby Digital 3/2.1CH

Dolby Digital 2CH

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Playing discs

Press AUDIO repeatedly to select an

audio channel option.

• Some discs only allow you to change

audio language from the disc menu.

Press TOP MENU to access.

Audio

Stereo

• To set audio language preferences, see

Audio Lingua on page 66.

Switching camera angles

Some DVD discs feature scenes shot from

two or more angles—check the disc box for

details.

Switching DVD-RW audio

channels

When a multi-angle scene is playing, a

icon appears on screen to let you know that

other angles are available (this can be

switched off if you prefer—see Angle Indicator

on page 68).

When playing a DVD-RW disc recorded with

dual-mono audio, you can switch between the

main, sub, and mixed channels during play-

back.

Press AUDIO repeatedly to select an

•

During playback (or when paused),

audio channel option.

press ANGLE to switch angle.

Audio

Dolby Digital 1+1CH

Displaying disc information

Various track, chapter and title information,

as well as the video transmission rate for DVD

discs, can be displayed on-screen.

Switching DVD-Audio audio

channels

During playback, press DISPLAY to

Depending on the disc, you may be able to

switch channels when playing DVD-Audio

discs—see the disc box for details.

show/switch the information displayed.

Keep pressing DISPLAY to change the

displayed information.

Press AUDIO repeatedly to select an

• DVD-Video displays

audio channel option.

Play

Titolo

DVD

ꢅ

Current / Total

11/38

Elapsed

2.05

Remain

4.57

Total

7.02

Audio

Dolby Digital

1. French

1. IT

Audio Dolby Digital 3/2.1CH

Subtitle

Angle

Play

DVD

ꢅ

Switching CD/MP3/Video CD/

Super VCD audio channels

Current / Total

11/38

Elapsed

2.05

Remain

4.57

Total

7.02

Chapter

Tr. Rate

8.6Mbps

You can switch between stereo, just the left

channel or just the right channel of a CD/

MP3/Video CD/Super VCD. (To change the

audio channel of a CD it must be playing.)

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Playing discs

The # mark displayed with some DVD-

Video discs means that the video is

playing at 24 frames/second, progressive.

• CD and Video CD

Play

Current / Total

2/16

Elapsed

1.07

Remain

4.40

Total

5.47

Track

Pause

Current / Total Elapsed

Chapter 2/36 0.06 15

Tr. Rate

DVD

Total

1.46

6.0Mbps

Remain

1.40

Play

Disc

Elapsed

28.00

Remain

30.20

Total

58.20

When the disc is paused, the display also

shows the frame number.

(During PBC playback only)

Play

VCD

• DVD-Audio displays

Play

DVD-Audio

With Super VCDs, only the elapsed time is

displayed.

Current / Total

1/14

Elapsed

3.20

Remain

2.41

Total

6.01

Track

Audio

- -

1 Linear PCM

192kHz 24bit 2/0CH

• MP3 disc displays

Subtitle

Angle

Play

MP3

ꢅ

-Audio

DVD

Play

Current / Total

1/17

Elapsed

0.18

Remain

12.42

Total

13.00

Current / Total

1/3

Elapsed

3.21

Remain

53.20

Total

Track

Group

56.41

Track Name

Outernational

Tr. Rate

9.5Mbps

Play

MP3

ꢅ

• DVD-RW displays

Current / Total

2/7

Folder

Folder Name ACP

Play

Titolo

DVD-RW

Original

ꢅ

Current / Total

1/32

Elapsed

0.08

Remain

30.22

Total

30.30

- -

Audio Dolby Digital

2/0CH

Subtitle

Play

DVD-RW

Original

ꢅ

• You can see disc information (number of

titles/chapters, groups, tracks, folders

and so on) from the Disc Navigator

Current / Total

1/1

Chapter

Tr. Rate

4.3Mbps

screen. See Using the Disc Navigator to

browse the contents of a disc on page 44.

• SACD displays

Play

SACD

Current / Total

1/14

Elapsed

0.13

Remain

4.21

Total

4.34

Track

(During multichannel playback only)

Play

SACD

Elapsed

0.22

Current / Total

1/9

Remain

3.38

Total

4.00

Track

3/2.1CH

Audio

Play

Disc

SACD

Elapsed

0.05

Remain

73.00

Total

73.05

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Audio Settings menu

Chapter 6

Audio Settings menu

Highlight Audio DRC, then use the

Note about features in the

Audio Settings menu

Joystick (left/right) to change to ‘On’ or

‘Off’ as required.

None of the features found in the Audio

Settings menu have any effect on sound

output through the i.LINK connector.

Audio Settings

Audio DRC

Off

Fix

Legato PRO

Hi-Bit

Virtual Surround

Channel Level

Audio DRC

• Default setting: Off

When watching Dolby Digital DVDs at low

volume, it’s easy to lose the quieter sounds

completely—including some of the dialog.

Switching Audio DRC (Dynamic Range

Control) to On can help by bringing up the

quieter sounds, while controlling loud peaks.

Press ENTER to make the setting and

exit the Audio Settings screen.

• Audio DRC is only effective with Dolby

Digital audio sources.

How much of a difference you hear depends

on the material you’re listening to. If the mate-

rial doesn’t have wide variations in volume,

you may not notice much change.

• Audio DRC is only effective through the

digital output when Digital Out is set to

On, and Dolby Digital Out (see page 64)

is set to Dolby Digital > PCM.

Press HOME MENU and select ‘Audio

Settings’ from the on-screen display.

• The effect of Audio DRC depends on your

speakers and AV receiver settings.

HOME MENU

DVD

Audio Settings

Play Mode

Video Adjust

Legato PRO

• Default setting: Off

Disc Navigator

Setup Navigator

Legato PRO technology can reveal more high-

frequency detail in CDs and DVDs by upsam-

pling.

Initial Settings

Press HOME MENU and select ‘Audio

Settings’ from the on-screen display.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Audio Settings menu

Highlight ‘Legato PRO’, then use the

Highlight ‘Hi-Bit’, then use the Joystick

Joystick (left/right) to change the setting.

(left/right) to change the setting to ‘On’ or

‘Off’, as required.

Audio Settings

Audio DRC

Off

Fix

Legato PRO

Hi-Bit

Audio DRC

Off

Fix

Legato PRO

Hi-Bit

Virtual Surround

Channel Level

Virtual Surround

Channel Level

There are four settings, plus Off.

Press ENTER to make the setting and

• Off

exit the Audio Settings screen.

• Standard – gives the sound a more

forward, live feel

Virtual Surround

• Effect 1 – bright and lively

• Effect 2 – soft and rich

• Default setting: Off

Switch on Virtual Surround to enjoy surround

sound effects from just two speakers.

• Effect 3 – solid and well-balanced

Press ENTER to make the setting and

exit the Audio Settings screen.

When you play a Dolby Digital or Pro Logic

encoded source, TruSurround technology

from SRS produces a deep, realistic 3D

soundspace from a pair of stereo speakers.

SRS TruSurround is a process certified by

Dolby Laboratories for Virtual Dolby Digital

sound.

• The Legato PRO digital filter affects

mainly frequencies outside of the audible

range.

• Depending on the listening conditions,

you may find that the effect of Legato PRO

difficult to hear.

• The Legato PRO effect is applied only to

the front left/right channels.

• Legato PRO does not work with 192kHz

DVD-Audio discs, or with SACDs.

Hi-Bit

• Default setting: On

The Hi-Bit feature extends the effective

dynamic range of the front left/right channels

from 16 or 20-bit to 24-bit to reveal more detail

in low-level sounds.

Press HOME MENU and select ‘Audio

Settings’ from the on-screen display.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Audio Settings menu

Press HOME MENU and select ‘Audio

Settings’ from the on-screen display.

Highlight Virtual Surround, then use

Highlight Channel Level, then use the

the Joystick (left/right) to change to ‘2V/

SRS TruSurround’ or ‘Off’, as required.

Joystick (left/right) to change to ‘Fix’ or

‘Variable’, as required.

Audio Settings

Audio DRC

Off

Fix

Off

Fix

Legato PRO

Hi-Bit

Legato PRO

Hi-Bit

Virtual Surround

Channel Level

Virtual Surround

Channel Level

Press ENTER to make the setting and

• Fix – Channel levels are fixed, but you can

exit the Audio Settings screen.

set the speaker distances

• Variable – You can specify variable

channel levels as well as speaker

distances

• You can also use the SURROUND button

on the remote control to switch Virtual

Surround on (2V/SRS TruSurround)/

Off.

If you chose Variable, use the joystick

(down) to proceed to the next screen.

Audio Settings

Audio DRC

Off

Legato PRO

Hi-Bit

Virtual Surround

Channel Level

Off

• Virtual Surround does not work with CD,

MP3, DVD-Audio or SACD discs, or 96kHz

Linear PCM soundtracks.

Variable

Variable setting only: Set the channel

levels for each speaker.

• The Virtual Surround effect is output only

through the analog AUDIO OUT (2ch)

jacks.

Audio Settings

Channel Level L

Channel Level C

Channel Level R

Channel Level RS

Channel Level LS

Channel Level SW

0.0 dB

• Make sure that Audio Output Mode is

set to 2 Channel (see Audio Output Mode

on page 75).

• How good the surround effect is varies

with the disc.

• Use the Joystick (up/down) to select a

speaker.

Channel Level

• Use the Joystick (left/right) to adjust the

channel level for that speaker.

• Default setting: Fix

This setting allows you to set the level of each

channel sent to the 5.1 channel analog

outputs.

Channel levels can be set from –6 dB to +6

dB. in 0.5 dB increments.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Audio Settings menu

Press ENTER to make the settings and

The center speaker (C) and subwoofer (SW)

can be set from –6.5 ft. / –2 m to +6.5 ft. / +2

m relative to the front left/right speakers.

exit the audio settings screen.

Surround left/right (LS/RS) speakers can be

set from –20 ft. / –6 m to +6.5 ft. / +2 m rela-

tive to the front left/right speakers.

• You can’t adjust the channel level for any

speakers that are set to Off in the

Speaker Installation menu screen (see

Speaker Installation on page 76).

When you adjust the front left (L) or front right

(R) speaker, all the other speaker distances

are adjusted relative to that speaker.

• The Fix setting is equivalent to setting all

the channel levels to +6 dB. Therefore, the

Variable setting will usually sound

quieter than the Fix setting.

Press ENTER to make the settings and

exit the audio settings screen.

Speaker Distance

• The speaker distance settings have no

effect on SACD playback. The channel

level settings, however, do apply.

• Default setting: all speakers 10ft. / 3 m

To get the best surround sound from your

system, you should set up the speaker

distances from your listening position.

Press HOME MENU and select ‘Audio

Settings’ from the on-screen display.

Move the cursor down until you reach

the Speaker Distance setting screen.

Audio Settings

Speaker Distance L

Speaker Distance C

Speaker Distance R

Speaker Distance RS

Speaker Distance LS

Speaker Distance SW

DV-S969AVi screen

• Use the joystick (up/down) to select a

speaker.

• Use the joystick (left/right) to adjust the

distance from your listening position to

that speaker.

Front left/right (L/R) speaker distances can be

set from 1ft. / 30 cm to 30ft. / 9 m in 0.5 ft. / 10

cm increments.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

The Video Settings menu

Chapter 7

The Video Settings menu

When the HDMI output is connected, the

following options appear instead:

Video Adjust

• Default setting: Professional or (when

• Direct – The picture appears simply

according to how the source was

encoded.

connected using HDMI) Direct

From the Video Adjust screen you can select

the standard video presentation or define

presets of your own.

• Natural – Edges are softer making this

setting good for movies.

Press HOME MENU and select ‘Video

• Enhanced – Edges are sharper making

this setting ideal for animation and mate-

rial with computer generated effects.

Adjust’ from the on-screen display.

You can also access these settings by

pressing V.ADJ (VIDEO ADJUST).

• Memory1–3 – Use for saving your own

presets (see below)

HOME MENU

DVD

Press ENTER to make the setting and

Audio Settings

Play Mode

Video Adjust

exit the Video Adjust screen.

Disc Navigator

Setup Navigator

Initial Settings

• Depending on the disc and the TV/

monitor, you may not see the effect

clearly.

Use the joystick (left/right) to select a

preset.

Video Adjust

Professional

Creating your own presets

You can create up to three presets of your

own.

• TV (CRT) – Optimized display for a regular

CRT TV

Select one of the Memory presets (see

above).

• PDP – Optimized display for a plasma

display screen

Use the joystick (down) to select

‘Detailed Settings’ then press ENTER.

• Professional – Optimized for a profes-

sional video monitor

Video Adjust

• Memory1–3 – Use for saving your own

presets (see below)

Memory1

Detailed Settings

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

The Video Settings menu

Adjust the picture quality settings.

• Detail – Adjusts the sharpness of edges

in the picture.

Memory1

1/3

• White Level – Adjusts the intensity of

white.

Memory1

Auto 1

Recall Settings

Prog. Motion

PureCinema

YNR

fast

slow

• Black Level – Adjusts the intensity of

black.

soft

min

fine

max

CNR

Sharpness High

Sharpness Mid

• Black Setup – Setup to correct the

floating black color for better 3-dimen-

sional realism.

• Use the joystick (up/down) to select a

setting.

• Gamma – Adjusts the brightness of

darker images.

• Use the joystick (left/right) to adjust the

current setting.

• Hue – Adjusts the overall color balance

between red and green.

• Press DISPLAY to switch between full and

single view.

• Chroma Level – Adjusts how saturated

colors appear.

• You can recall the preset number from the

Recall Settings menu item.

• Chroma Delay – Adjust to correct the gap

between the Y and C components in the

video signal. (This setting only affects

progressive video output.)

You can adjust any or all of the following

picture quality settings:

• Prog. Motion – Adjusts the motion and

still picture quality when the player is set

to progressive video output. This has no

effect when set to ON.

When the HDMI output is connected, the

following options also appear:

• HDMI Color Adjust – Adjusts the overall

color intensity in the HDMI video signal

(select between Standard and

Enhanced).

• PureCinema – When watching DVD

movies, PureCinema optimizes the

picture quality. The default setting is

Auto1, but if the picture appears unnat-

ural, then set to Auto2, ON or Off, as

appropriate.

• HDMI Detail – Adjusts the sharpness of

edges in the HDMI video signal.

Press ENTER to save the preset and

• YNR – Adjusts the amount of noise reduc-

tion in the Y (brightness) part of the video

signal.

exit the Video Adjust screen.

• CNR – Adjusts the amount of noise reduc-

tion in the C (color) part of the video

signal.

• Video on a DVD discs may be either video

material (originally shot on video) or film

material (originally shot on film). Video

material has a frame rate of 30 frames/

sec.(NTSC), compared with 24 frames/

sec. for film. This player converts film

material to 60 frames/sec. (in progressive

scan mode). PureCinema adjusts the

picture so that it matches more closely

the picture quality of a cinema screen.

• Sharpness High – Adjusts the sharpness

of the high-frequency (detailed) elements

in the picture.

• Sharpness Mid – Adjusts the sharpness

of the mid-frequency (less detailed)

elements in the picture.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

The Video Settings menu

You can see whether video on a DVD disc

is film or video material by displaying the

video transmission rate (see Displaying

disc information on page 54). If a hash

mark (#) appears next to the transmis-

sion rate display, it is film material.

• You may find that selecting the Enhanced

mode in HDMI Color Adjust causes

picture problems on your TV. You can

correct this if your TV has an RGB mode

that you can switch on when this occurs.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Initial Settings menu

Chapter 8

Initial Settings menu

Using the Initial Settings

Digital Audio Out settings

The Initial Settings menu gives you complete

control in setting up your DVD player,

• None of the Digital Audio Out settings

affect the audio output from the i.LINK

interface. For i.LINK settings, see i.LINK

Setup on page 79.

including audio, and video output settings,

audience limitation settings, among others.

If an option is grayed out it means that it

cannot be changed at the current time. This is

usually because a disc is playing. Stop the

disc, then change the setting.

Digital Out

• Default setting: On

Press HOME MENU and select ‘Initial

You only need to make this setting if you

connected this system to an AV receiver (or

other component) using one of the digital

outputs.

Settings’ from the on-screen display.

HOME MENU

DVD

Audio Settings

Play Mode

Video Adjust

Initial Settings

Disc Navigator

Setup Navigator

Digital Audio Out

Video Output

Lingua

Digital Out

Off

Initial Settings

Dolby Digital Out

DTS Out

Display

Linear PCM Out

MPEG Out

Options

Select the setup category from the list

Speakers

i.LINK Setup

on the left, then select an item from the

menu list to the right.

If at any time you need to switch off the digital

audio output, set this to Off, otherwise leave it

On.

Make the setting you want.

• The language options shown in the on-

screen display illustrations on the

following pages may not correspond to

those available in your country or region.

• You can’t switch on/off the optical and

coaxial outputs individually.

• There is no digital output when playing

SACDs and some DVD-Audio discs

regardless of this setting.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Initial Settings menu

Dolby Digital Out

• Default setting: Dolby Digital

• If you set to DTS with a non-DTS compat-

ible amplifier, noise will be output when

you play a DTS disc.

You only need to make this setting if you

connected this player to an AV receiver (or other

component) using one of the digital outputs.

• This setting applies only to DTS audio on

DVDs. DTS-CD always output DTS digital

audio as-is regardless of this setting.

Initial Settings

Digital Audio Out

Video Output

Lingua

Digital Out

Dolby Digital

Dolby Digital Out

DTS Out

Dolby Digital > PCM

Display

Linear PCM Out

MPEG Out

Linear PCM Out

Options

• Default setting: Down Sample On

Speakers

i.LINK Setup

You only need to make this setting if you

connected this player to an AV receiver (or other

component) using one of the digital outputs.

If your AV receiver (or other connected

component) is Dolby Digital compatible, set

to Dolby Digital, otherwise set to Dolby

Digital > PCM.

Initial Settings

Digital Audio Out

Video Output

Lingua

Digital Out

Down Sample On

Down Sample Off

Dolby Digital Out

DTS Out

• Default setting: DTS

Display

Linear PCM Out

MPEG Out

Options

Speakers

i.LINK Setup

You only need to make this setting if you

connected this player to an AV receiver (or other

component) using one of the digital outputs.

If your AV receiver (or other connected

component) is compatible with high

Initial Settings

sampling rates (96 kHz), set this to Down

Sample Off, otherwise set it to Down

Sample On (96 kHz audio is converted to a

more compatible 48 kHz). Check the manual

that came with the other component if you’re

unsure whether it is 96 kHz compatible.

Digital Audio Out

Video Output

Lingua

Digital Out

DTS

Dolby Digital Out

DTS Out

DTS > PCM

Display

Linear PCM Out

MPEG Out

Options

Speakers

i.LINK Setup

If your AV receiver (or other connected

component) has a built-in DTS decoder, set

this to DTS, otherwise set to DTS > PCM (DTS

audio is converted to more compatible PCM

audio). Check the manual that came with the

other component if you’re unsure whether it

is DTS compatible.

• Even when set to Down Sample Off,

some discs will still output down-sampled

audio through the digital outputs (you

only get full sampling rate audio through

the analog outputs).

• High sampling rate DVD-Audio discs

(192kHz or 176.2kHz) automatically

output down-sampled audio through the

digital outputs.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Initial Settings menu

• When an HDMI component is connected,

the setting is automatically fixed to Down

Sample Off. However, 96kHz sources will

still be downsampled to 48kHz.

(4:3) format, the settings on your TV will deter-

mine how the material is presented—see the

manual that came with your TV for details on

what options are available.

When set to 16:9(Compressed), progressive-

scan 4:3 material is shown with black bars on

either side of the screen.

MPEG Out

• Default setting: MPEG > PCM

If you have a conventional TV, select either 4:3

(Letter Box) or 4:3 (Pan&Scan). In Letter Box

mode, widescreen software is shown with

black bars at the top and bottom of the

screen. Pan & Scan chops the sides off

widescreen material to make it fit the 4:3

screen (so even though the image looks

larger on the screen, you’re actually seeing

less of the picture). See also Screen sizes and

disc formats on page 83.

You only need to make this setting if you

connected this player to an AV receiver (or other

component) using one of the digital outputs.

Initial Settings

Digital Audio Out

Video Output

Lingua

Digital Out

MPEG

Dolby Digital Out

DTS Out

MPEG > PCM

Display

Linear PCM Out

MPEG Out

Options

Speakers

i.LINK Setup

If your AV receiver (or other connected

component) is compatible with MPEG audio,

set this to MPEG, otherwise set it to MPEG >

PCM (MPEG audio is converted to more

compatible PCM audio). Check the manual

that came with the other component if you’re

unsure whether it is MPEG audio compatible.

• You can’t change the video output setting

when an HDMI component is connected.

Component Out

• Default setting: Interlace

You only need to make this setting if you

connected this player to your TV using the

component video outputs.

Video Output settings

Initial Settings

TV Screen

• Default setting: 16:9 (Wide)

Digital Audio Out

Video Output

Lingua

TV Screen

Progressive

Interlace

Component Out

S-Video Out

Still Picture

Initial Settings

Display

Options

Digital Audio Out

Video Output

Lingua

4:3 (Letter Box)

4:3 (Pan&Scan)

16:9 (Wide)

TV Screen

Speakers

Component Out

S-Video Out

Still Picture

i.LINK Setup

Display

16:9 (Compressed)

Options

If you have a progressive-scan compatible TV,

set this to Progressive for flicker-free video

output. If your TV is not compatible with

progressive-scan video, set to Interlace.

Check the operating instructions that came

with your TV if you’re unsure about its

compatibility.

Speakers

i.LINK Setup

If you have a widescreen TV, select the 16:9

(Wide) setting—widescreen DVD software is

then shown using the full screen area. When

playing software recorded in conventional

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Initial Settings menu

• Frame – produces a sharper image, but

more prone to shake than field stills

• This player is compatible with both PAL

and NTSC progressive scan formats.

However, your TV must also be progres-

sive scan compatible to take advantage of

this feature.

Lingua settings

• The language options shown in the on-

screen display illustrations on the

following pages may not correspond to

those available in your country or region.

S-Video Out

• Default setting: S2

You only need to make this setting if you

connected this player to your TV using an S-

video cable.

Audio Lingua

• Default setting: IT

Initial Settings

Digital Audio Out

Video Output

Lingua

TV Screen

Component Out

S-Video Out

Still Picture

Digital Audio Out

Video Output

Lingua

Audio Lingua

Subtitle Lingua

Auto Lingua

DVD Menu Lang.

Subtitle Display

Display

French

Options

German

Italian

Speakers

Display

i.LINK Setup

Options

Spanish

Dutch

Speakers

i.LINK Setup

Other Lingua

If you find that the picture is stretched or

distorted on the default S2 setting, try

changing it to S1.

DV-59AVi screen

This setting is your preferred audio language

for DVD discs. If the language you specify

here is recorded on a disc, the player auto-

matically plays the disc in that language.

Still Picture

• Default setting: Auto

The DVD format recognizes 136 different

languages. Select Other Lingua if you

want to specify a language other than those

listed. See also Selecting languages using the

language code list on page 89.

Initial Settings

Digital Audio Out

TV Screen

Field

Frame

Auto

Video Output

Lingua

Display

Component Out

S-Video Out

Still Picture

Options

Speakers

i.LINK Setup

This player uses one of two processes when

displaying a still frame from a DVD disc. The

default Auto setting automatically chooses

the best setting each time.

• You can switch between the languages

recorded on a DVD disc during playback

using the AUDIO button. (This does not

affect this setting.) See Switching the DVD

audio language on page 53.

• Field – produces a stable, generally

shake-free image

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Initial Settings menu

• Some DVD discs set the audio language

automatically when loaded, overriding the

audio language you set in the Initial

Settings menu.

• Discs with two or more subtitle

languages usually allow you to select the

subtitle language from the disc menu.

Press TOP MENU to access the disc

menu.

• Discs with two or more audio languages

usually allow you to select the audio

language from the disc menu. Press TOP

MENU to access the disc menu.

Auto Lingua

• Default setting: On

Initial Settings

Subtitle Lingua

• Default setting: IT

Digital Audio Out

Video Output

Lingua

Audio Lingua

Subtitle Lingua

Auto Lingua

DVD Menu Lang.

Subtitle Display

Off

Initial Settings

Display

Options

Digital Audio Out

Video Output

Lingua

Audio Lingua

Subtitle Lingua

Auto Lingua

DVD Menu Lang.

Subtitle Display

Speakers

French

i.LINK Setup

German

Italian

Display

Options

Spanish

Dutch

When set to On, the player always selects the

default audio language on a DVD-Video disc

(French dialog for a French movie, for

example), and displays subtitles in your

preferred subtitle language only if that is set

to something different. In other words, movies

in your native language won’t have any subti-

tles, while foreign language movies will be

shown with subtitles.

Speakers

i.LINK Setup

Other Lingua

DV-59AVi screen

This setting is your preferred subtitle

language for DVD discs. If the language you

specify here is recorded on a disc, the player

automatically plays the disc with those subti-

tles.

Set to Off to have the player play discs strictly

according to your Audio Lingua and

Subtitle Lingua settings.

The DVD format recognizes 136 different

languages. Select Other Lingua if you

want to specify a language other than those

listed. See also Selecting languages using the

language code list on page 89.

For Auto Lingua to work, the Audio

Lingua and Subtitle Lingua settings

must be the same (see Audio Lingua on

page 66 and Subtitle Lingua on page 67).

• You can change or switch off the subtitles

on a DVD disc during playback using the

SUBTITLE button. (This does not affect

this setting.) See Switching subtitles on

page 53.

• You can still switch audio and subtitle

language on playback using the AUDIO

and SUBTITLE buttons.

• Some DVD discs set the subtitle language

automatically when loaded, overriding the

subtitle language you set in the Initial

Settings menu.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Initial Settings menu

DVD Menu Lingua

• Default setting: w/Subtitle Lang.

Display settings

OSD Lingua

Initial Settings

• Default setting: IT

Digital Audio Out

Video Output

Lingua

Audio Lingua

Subtitle Lingua

Auto Lingua

DVD Menu Lang.

Subtitle Display

w/Subtitle Lang.

Other Lingua

Initial Settings

Display

Options

Digital Audio Out

Video Output

Lingua

OSD Lingua

On Screen Display

Angle Indicator

Background

Speakers

français

Deutsch

Italiano

i.LINK Setup

Display

Options

Screen Saver

Español

Nederlands

Speakers

Some multilingual discs have disc menus in

several languages. This setting specifies in

which language the disc menus should

appear. Leave on the default setting for

menus to appear in the same language as

your Subtitle Lingua—see above.

i.LINK Setup

DV-59AVi screen

This sets the language of this player’s on-

screen displays.

The DVD format recognizes 136 different

languages. Select Other Lingua if you

want to specify a language other than those

listed. See also Selecting languages using the

language code list on page 89.

On Screen Display

• Default setting: On

Initial Settings

Digital Audio Out

Video Output

Lingua

OSD Lingua

On Screen Display

Angle Indicator

Background

Off

Subtitle Display

• Default setting: On

Display

Options

Screen Saver

Speakers

Initial Settings

i.LINK Setup

Digital Audio Out

Video Output

Lingua

Audio Lingua

Subtitle Lingua

Auto Lingua

DVD Menu Lang.

Subtitle Display

This sets whether operation displays are

shown on-screen (Play, Resume, Scan and so

on.)

Off

Assist Subtitle

Display

Options

Speakers

i.LINK Setup

Angle Indicator

When set to On, the player displays subtitles

according to the Subtitle Lingua and Auto

Lingua settings. Set to Assist Subtitle to

have the player display the extra assistive

subtitles recorded onto some DVD discs. Set

to Off to switch subtitles off altogether.

• Default setting: On

Initial Settings

Digital Audio Out

Video Output

Lingua

OSD Lingua

On Screen Display

Angle Indicator

Background

Off

Display

Options

Screen Saver

Speakers

i.LINK Setup

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Initial Settings menu

If you prefer not to see the camera icon on-

screen during multi-angle scenes on DVD

discs, change this setting to Off.

Some DVD-Video discs feature a Parental

Lock level. If your player is set to a lower level

than the disc, the disc won’t play. This gives

you some control about what your children

watch on your DVD player.

Background

• Default setting: Black

Some discs also support the Country code

feature. The player does not play certain

scenes on these discs, depending on the

Country code you set.

Initial Settings

Digital Audio Out

Video Output

Lingua

OSD Lingua

On Screen Display

Angle Indicator

Background

Pioneer Logo

Black

Before you can set the Parental Lock level or

the Country code you must register a pass-

word. As the password owner, you can

change the Parental Lock level or Country

code whenever you like. You can also change

the password.

Display

Options

Screen Saver

Speakers

i.LINK Setup

This specifies what is displayed on-screen

when the player is stopped.

Screen Saver

• Not all discs that you may consider inap-

propriate for your children use the

Parental Lock feature. These discs will

always play without requiring the pass-

word first.

• Default setting: Off

Initial Settings

Digital Audio Out

Video Output

Lingua

OSD Lingua

On Screen Display

Angle Indicator

Background

Off

• If you forget your password, you’ll need to

reset the player to its factory settings (see

Resetting the player on page 83), then

Display

Options

Screen Saver

Speakers

i.LINK Setup

Registering a new password

You must register a password before you can

change the Parental Lock level or enter a

Country code.

If a constant image is displayed on a conven-

tional CRT-type TV, it can ‘burn in’ leaving a

ghost image on the screen. Switch to On to

make sure that a constant image is not

displayed for a dangerously long time.

Select ‘Password’.

Initial Settings

Options

Digital Audio Out

Video Output

Lingua

Parental Lock

Password

Bonus Group

Level Change

Country Code

Auto Disc Menu

Group Playback

DVD Playback Mode

SACD Playback

HDMI Settings

Parental Lock

• Default level: Off

Display

Options

Speakers

• Default password: none

i.LINK Setup

• Default Country code: us (2119)

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Initial Settings menu

Use the number buttons to enter a 4-

Enter a new password.

digit password.

Initial Settings

Digital Audio Out

Video Output

Lingua

Parental Lock : Password Change

Digital Audio Out

Video Output

Lingua

Password

Parental Lock: Register Code Number

Display

New Password

Options

Display

Speakers

Options

i.LINK Setup

Speakers

i.LINK Setup

Press ENTER to register the new pass-

Press ENTER to register the password

word and return to the Options menu

screen.

and return to the Options menu screen.

If you forget your password, you can reset the

player then register a new one. See Resetting

the player on page 83 for how to reset the

player.

Setting/changing the Parental Lock level

Select ‘Level Change’.

Initial Settings

Changing your password

To change your password, confirm your

existing password then enter a new one.

Digital Audio Out

Video Output

Lingua

Parental Lock

Password Change

Level Change

Bonus Group

Auto Disc Menu

Group Playback

DVD Playback Mode

SACD Playback

HDMI Settings

Country Code

Display

Options

Select ‘Password Change’.

Speakers

i.LINK Setup

Initial Settings

Use number buttons to enter your

Digital Audio Out

Video Output

Lingua

Parental Lock

Password Change

Level Change

Bonus Group

password, then press ENTER.

Auto Disc Menu

Group Playback

DVD Playback Mode

SACD Playback

HDMI Settings

Country Code

Display

Options

Initial Settings

Speakers

i.LINK Setup

Parental Lock : Level Change

Password

Digital Audio Out

Video Output

Lingua

Use the number buttons to enter your

Display

Options

existing password, then press ENTER.

• The numbers appear as asterisks as you

enter them.

Speakers

off

i.LINK Setup

Initial Settings

Parental Lock : Password Change

Password

Digital Audio Out

Video Output

Lingua

Display

New Password

Options

Speakers

i.LINK Setup

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Initial Settings menu

Select a new level.

• Select by code letter: Use the Joystick (up/

down) to change the Country code.

Initial Settings

Parental Lock : Level Change

Digital Audio Out

Video Output

Lingua

Password

Parental Lock : Change Country Code

Digital Audio Out

Video Output

Lingua

Password

Display

Options

Display

Country Code List

Code

Speakers

off

Options

i.LINK Setup

Speakers

i.LINK Setup

Use the Joystick to move the cursor left to lock

more levels (more discs will require the pass-

word); move right to unlock levels. You can’t

lock level 1.

• Select by code number: Use the Joystick

to move the cursor right then use the

number buttons to enter the 4-digit

Country code (you can find the Country

code list on page 88.)

Press ENTER to set the new level and

return to the Options menu screen.

Initial Settings

Setting/changing the Country code

You may also want to refer to the Country code

list on page 88.

Digital Audio Out

Video Output

Lingua

Parental Lock : Change Country Code

Password

Display

Country Code List

Code

Options

Select ‘Country Code’.

Speakers

i.LINK Setup

Initial Settings

Press ENTER to set the new Country

Digital Audio Out

Video Output

Lingua

Parental Lock

Password Change

Level Change

Bonus Group

code and return to the Options menu

screen.

Auto Disc Menu

Group Playback

DVD Playback Mode

SACD Playback

HDMI Settings

Country Code

Display

Options

Speakers

i.LINK Setup

• Changing the Country code does not take

effect until the next disc is loaded (or the

current disc is reloaded).

Use number buttons to enter your

password, then press ENTER.

Initial Settings

Bonus Group

Parental Lock : Change Country Code

Digital Audio Out

Video Output

Lingua

Password

Initial Settings

Display

Country Code List

Code

Options

Speakers

Digital Audio Out

Video Output

Lingua

Parental Lock

Bonus Group

Off (jp)

i.LINK Setup

Auto Disc Menu

Group Playback

DVD Playback Mode

SACD Playback

HDMI Settings

Display

Single

Select a Country code.

Options

DVD-Audio

2ch Area

Speakers

There are two ways you can do this.

i.LINK Setup

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Initial Settings menu

Some DVD-Audio discs have an extra ‘bonus’

group that requires a 4-digit key number to

access. See the disc packaging for details

and the key number.

• Some DVD discs display a menu automat-

ically regardless of this setting. If you

press ꢅ while a disc is loading, this

setting is ignored.

When you play a DVD-Audio disc that has a

bonus group, the key number input screen

appears automatically. You can also access

the same screen here.

Group Playback

• Default setting: Single

Initial Settings

Digital Audio Out

Initial Settings

Bonus Group : Key Number Input

Video Output

Lingua

Digital Audio Out

Video Output

Lingua

Parental Lock

Bonus Group

All

Display

Single

Options

Auto Disc Menu

Group Playback

DVD Playback Mode

SACD Playback

HDMI Settings

Speakers

i.LINK Setup

Display

Options

Speakers

i.LINK Setup

DVD-Audio discs can have up to 9 groups of

tracks. When set to Single, the selected

group plays and then the disc stops, or

returns to the menu screen. Use Group

Search (see Searching a disc on page 52) to

select the group to play. (You cannot use the

track skip ꢉ / ꢈ or scan buttons ꢊ /

ꢇ in this mode.)

• If you eject the disc, switch the power off,

or unplug the player, you will need to re-

enter the key number.

Auto Disc Menu

• Default setting: On

Set to All if you want to play all the groups on

Initial Settings

a disc consecutively.

Digital Audio Out

Video Output

Lingua

Parental Lock

Bonus Group

Off

Auto Disc Menu

Group Playback

DVD Playback Mode

SACD Playback

HDMI Settings

Display

Options

Speakers

• Even if the players is set to All but you

select a group to play from the disc menu,

only that group will play. If you stop play-

back, all groups will play again when you

restart playback.

i.LINK Setup

This specifies whether the menu (Top menu)

is automatically displayed after loading a

disc. Set to On if you want the menu displayed

automatically, or Off if you don’t want it

displayed.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Initial Settings menu

• If you select an area that isn’t on the disc

loaded, a different area of the disc will

play. For example, if you choose standard

CD audio but the disc loaded is not a

hybrid SACD, the stereo SACD audio will

play.

DVD Playback Mode

• Default setting: DVD-Audio

Initial Settings

Digital Audio Out

Video Output

Lingua

Parental Lock

Bonus Group

DVD-Audio

DVD-Video

Auto Disc Menu

Group Playback

DVD Playback Mode

SACD Playback

HDMI Settings

Display

Options

HDMI Settings

Speakers

You only need to make this setting if you

connected this player to an HDMI-compatible

component using the HDMI connector.

i.LINK Setup

Some DVD-Audio discs contain DVD-Video

content in addition to the DVD-Audio. Set to

DVD-Video to play a DVD-Audio disc as if it

were a DVD-Video disc. Note that in this case

only the DVD-Video part of the disc will play.

Initial Settings

Digital Audio Out

Video Output

Lingua

Parental Lock

Bonus Group

Off (jp)

Auto Disc Menu

Group Playback

DVD Playback Mode

SACD Playback

HDMI Settings

Display

Single

Options

DVD-Audio

2ch Area

Speakers

i.LINK Setup

• This setting reverts to DVD-Audio

(default) when the disc tray is opened, or

the power is switched into standby.

After selecting HDMI from the Initial Settings

menu, the HDMI settings menu appears. For

example, if you connected a Pioneer display,

the following menu should be displayed with

the component name showing where

XXXXXX appears below:

SACD Playback

• Default setting: 2ch Area

Initial Settings

Digital Audio Out

Video Output

Lingua

Parental Lock

Bonus Group

2ch Area

XXXXXX

Multi-ch Area

CD Area

720x480 P

16:9

Resolution

Aspect Ratio

Video Memory

Audio

Auto Disc Menu

Group Playback

DVD Playback Mode

SACD Playback

HDMI Settings

Display

Direct

Options

LPCM

Speakers

i.LINK Setup

With DVI/HDCP-compatible devices, the

same screen is shown, but with the audio

setting grayed-out (there is no audio with

DVI):

SACD discs can be divided up into several

different areas — stereo audio (2ch Area),

multi-channel audio (Multi-ch Area) and, for

hybrid SACDs, standard CD audio (CD Area).

Select which you want to listen to.

720x480 P

16:9

Resolution

Aspect Ratio

Video Memory

Audio

Direct

• For multi-channel audio from the i.LINK

and 5.1 channel analog outputs, SACD

playback must be set to Multi-ch Area.

LPCM

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Initial Settings menu

• Use the joystick (up/down) to select a

setting.

• 4:3 (Letter Box) – Widescreen discs are

shown with black bars top and bottom.

• Use the joystick (left/right) to adjust the

current setting.

• 4:3 (Pan&Scan) – Widescreen discs are

shown with the left and right sides

cropped.

• After you’ve finished, press ENTER to

confirm any settings you’ve made and

return to the Initial Settings menu.

• 16:9 (Wide) – Use this setting if you have

a widescreen monitor.

You can adjust any or all of the following

HDMI settings (the same options are avail-

able for DVI/HDCP-compatible devices):

• 16:9(Compressed) – Progressive-scan

4:3 material is shown with black bars on

either side of the screen.

Disc type

Resolution

Compressed

4:3

Aspect Monitor

Since HDMI has the capacity to support many

different high-definition video formats, you

may want to change the resolution depending

on the monitor you’re using. The options that

appear will depend on the video format of the

current disc (NTSC or PAL).

HDMI

resolution

setting

Aspect Monitor

(HDMI ) setting

4:3/

16:9

(Wide)

Full/

Squeeze

720 x 480 I/P

(720 x 576 I/P)

Nor-

mal/

Pass-

thru/4:3

16:9

(Wide)

1280 x 720 P

1920 x 1080 I

Normal/ 16:9

• VGA – 640x480 pixel progressive-scan

video (NTSC only)

Pass-

(Com-

thru/4:3 pressed)

• 720 x 480 P (NTSC)/ 720 x 576 P (PAL) –

720x480/576 pixel progressive-scan video

Video Memory

• 720 x 480 I (NTSC)/ 720 x 576 I (PAL) –

720x480/576 pixel interlace video

These settings allow you to change the

appearance of the HDMI video presentation.

You can also access these options from the

Video Adjust menu (see Video Adjust on

page 60 for more on this).

• 1280 x 720 P – 1280x720 pixel progres-

sive-scan video

• 1920 x 1080 I – 1920x1080 pixel interlace

video

• Direct – The picture appears simply

according to how the source was

encoded.

• Natural – Edges are softer making this

setting good for movies.

• A message will appear if you select an

incompatible resolution.

• Enhanced – Edges are sharper making

this setting ideal for animation and mate-

rial with computer generated effects.

Aspect Ratio

Select an aspect ratio according to the kind of

display you have, and how you want to see the

image on-screen. Refer to the table below to

match the HDMI resolution you chose in

Resolution above to the disc type you’re using

and the setting on your monitor. See also

Screen sizes and disc formats on page 83.

• Memory1–3 – Use for saving your own

presets (see Creating your own presets on

page 60 for more on this)

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Initial Settings menu

When set to DTS CD Playback, playback is

optimized for DTS CDs. In this mode you

cannot play standard audio CDs through the

analog outputs. Change the setting back to

PCM Playback to play standard CDs.

Audio

If the monitor or device you have connected

using HDMI is not compatible with

compressed multi-channel formats, you

should set this to LPCM, otherwise set to

Auto.

The i.LINK audio output is not affected by this

setting.

• LPCM – All audio signals are downmixed

to linear PCM (2-channel).

• Auto – Dolby Digital, DTS and MPEG

sources are processed according to how

they were encoded, and linear PCM

sources are heard with no processing.

DTS Downmix

• Default setting: Stereo

Initial Settings

Digital Audio Out

Video Output

Lingua

CD Playback

Stereo

Lt/Rt

DTS Downmix

Display

Options

• Even with Auto selected, if the monitor or

device you have connected using HDMI is

not compatible with multi-channel

formats, the audio signal will be

Speakers

i.LINK Setup

If you’ve selected DTS > PCM in DTS Out on

page 64, or 2 Channel in Audio Output Mode

below, you can choose the way the DTS signal

is downmixed PCM audio. Stereo downmixes

the signal to 2-channel stereo, whereas Lt/Rt

downmixes to a 2-channel signal compatible

with Dolby surround matrix decoders. (This

allows you to hear surround sound if your AV

receiver or amplifier has Dolby Pro Logic

capability.)

downmixed to linear PCM as above.

• It is not possible to output SACD, or copy-

controlled DVD-Audio CPPM sources

from the HDMI connection.

• 96/192 kHz sources are downsampled to

48 kHz and 88.2/176.4 kHz sources are

downsampled to 44.1 kHz.

CD Playback

• Default setting: PCM Playback

Speakers

Initial Settings

Digital Audio Out

Video Output

Lingua

CD Playback

PCM Playback

Audio Output Mode

• Set in Setup Navigator (Default: 2

Channel)

DTS Downmix

DTS CD Playback

Display

Options

Speakers

i.LINK Setup

Initial Settings

Digital Audio Out

Video Output

Lingua

Display

Audio Out

2 Channel

When set to PCM Playback, playback is opti-

mized for standard audio CDs. You can also

play DTS CDs, however you may notice some

noise when a DTS CD starts playing. This is

not a malfunction.

Speaker Installation

Speaker Distance

Channel Level

5.1 Channel

Options

Speaker

i.LINK Setup

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Initial Settings menu

If you connected this player to an AV receiver

using the 5.1 channel analog outputs, set this

to 5.1 Channel. This will enable you to enjoy

multichannel sound.

Use the Speaker Installation screen to tell

the player what kinds of speakers you have

connected.

Use the Joystick to move the cursor

If you connected only the stereo analog

outputs, set to 2 Channel. On this setting

multichannel audio is downmixed to 2 chan-

nels for stereo analog output.

up/down to select a speaker.

• The L and R, and RS and LS speakers are

paired; you can’t set them differently.

Initial Settings

Digital Audio Out

Video Output

Large

Lingua

Display

• When set to 5.1 Channel, you’ll only get

sound from all speakers when playing

multichannel discs.

Options

Speakers

i.LINK Setup

• When set to 5.1 Channel the AUDIO

OUT (2ch) jacks output the front L/R

channels of multichannel discs.

Move the cursor right to modify the

selected speaker.

• When set to 5.1 Channel there is no

optical/coaxial digital or HDMI output

when playing DVD-Audio discs.

Use the Joystick (up/down) to change

the current setting.

• You can see the effect of your changes in

the room graphic on the right of the

screen.

• Some DVD-Audio discs don’t allow down-

mixing of audio. These discs always

output multi-channel audio regardless of

the setting made here.

• Except for the subwoofer, you can set

speaker size to Large or Small. If the main

speaker cone in the speaker is 12cm or

more, set to Large, otherwise set to Small

(or Off if you don’t have that speaker).

Speaker Installation

• Set in Setup Navigator (default: L/R:

Large | C: Large | LS/RS: Large| SW: On)

• If you set the front L and R speakers to

Small, the center and surround speakers

are automatically set to Small and the

subwoofer to On.

You only need to make this setting if you

connected this player to your amplifier using

the 5.1 channel analog outputs.

• The subwoofer can only be set to On or

Off.

This setting does not affect any digital audio

output.

Move the cursor left to go back to the

Initial Settings

speaker list if you want to modify another

speaker, or press ENTER to exit the

Speaker Installation screen.

Digital Audio Out

Video Output

Lingua

Audio Output Mode

Speaker Installation

Speaker Distance

Channel Level

2 Channel

Fix

Display

Options

Speakers

i.LINK Setup

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Initial Settings menu

• Front left/right (L/R) speaker distances

can be set from 1ft. / 30 cm to 30ft. / 9 m

in 0.5 ft. / 10 cm increments.

Speaker Distance

• Default setting: all speakers 10ft. / 3 m

You only need to make this setting if you

connected this player to your amplifier using

the 5.1 channel analog outputs.

• The center speaker (C) and subwoofer

(SW) can be set from –6.5 ft. / –2 m to

+6.5 ft. / +2 m relative to the front left/

right speakers.

These settings do not affect any digital audio

output.

• Surround left/right (LS/RS) speakers can

be set from –20 ft. / –6 m to +6.5 ft. / +2

m relative to the front left/right speakers.

To get the best surround sound from your

system, you should set up the speaker

distances from your listening position.

Move the cursor left to go back to the

Initial Settings

speaker list if you want to modify another

speaker, or press ENTER to exit the

Speaker Distance screen.

Digital Audio Out

Video Output

Lingua

Audio Output Mode

Speaker Installation

Speaker Distance

Channel Level

2 Channel

Fix

Display

Options

Speakers

i.LINK Setup

• Speaker Distance settings do not affect

SACD playback.

Use the Joystick to move the cursor

up/down to select a speaker.

• The L and R speakers are paired; you can’t

set them differently.

Channel Level

• Default setting: Fix

You only need to make this setting if you

connected this player to your amplifier using

the 5.1 channel analog outputs.

Initial Settings

Digital Audio Out

Video Output

Lingua

Display

These settings do not affect any digital audio

output.

Options

Speakers

i.LINK Setup

Initial Settings

Digital Audio Out

Video Output

Lingua

Audio Output Mode

Speaker Installation

Speaker Distance

Channel Level

Fix

DV-S969AVi screen

Move the cursor right to change the

speaker distance for the highlighted

speaker.

Variable

Display

Options

Speakers

i.LINK Setup

Use the Joystick (up/down) to change

the distance.

• When you change the distance settings of

the front left (L) or front right (R) speakers,

all the other speaker distances change

relative to it.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Initial Settings menu

When set to Fix, the level of each of the 5.1

channel analog outputs is fixed. Choose Vari-

able if you want to adjust the relative levels to

balance the surround sound better for your

listening room.

Manual: Use the Joystick to move the cursor

up/down to select a speaker.

Initial Settings

Auto

Digital Audio Out

Video Output

0.0dB

Lingua

Display

Initial Settings

Auto

Options

Digital Audio Out

Speakers

i.LINK Setup

Video Output

0.0dB

Lingua

Display

Options

Move the cursor right (or press ENTER) then

use the Joystick (up/down) to set the channel

output level.

Speakers

i.LINK Setup

You can set the individual channel levels

between –6dB and +6dB in 0.5 dB incre-

ments using the test tone output as a guide to

set the correct levels. Adjust the levels until

the output level from all channels sounds the

same from your usual listening position. Note

that Audio Output Mode (page 75) must be

set to 5.1 Channel in order to use the test

tone.

Initial Settings

Auto

Digital Audio Out

Video Output

0.0dB

Lingua

Display

Options

Speakers

i.LINK Setup

To turn the test tone on/off for an individual

speaker, move the cursor right. The test tone

continues playing even when you select a

different speaker.

Automatic: Select Auto to start the test tone

output. No sound will be heard from the

subwoofer.

Initial Settings

Auto

Digital Audio Out

Video Output

0.0dB

Video Output

0.0dB

Lingua

Display

Lingua

Display

Options

Speakers

i.LINK Setup

Speakers

i.LINK Setup

As the test tone plays through each speaker in

turn, it is highlighted on-screen. Use the

Joystick (up/down) to adjust the channel

output level of the current speaker. Move the

cursor left to exit the test tone sequence, or

ENTER to save the settings and exit the

channel level setting screen.

To save the settings and exit, press ENTER

with the channel level field highlighted (as

shown above).

• The subwoofer output will sound quite low

compared to the other speakers.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Initial Settings menu

i.LINK Setup

i.LINK Audio are shown in black (an i.LINK

receiver, for example); those which can’t (a

DV camcorder, for example) are shown in

gray. If the player can’t display the name of a

component, ‘****’ is shown; if the name

can’t be determined, Unknown is displayed.

Audio Out

• Default setting: On

You only need to make this setting if you

connected this player to other equipment

using the i.LINK interface.

Select the component that you want to set up

the audio output formats for.

Initial Settings

Digital Audio Out

Video Output

Lingua

Connections Setup

VSX-49TXi : Pioneer

Digital Audio Out

Video Output

Lingua

Audio Out

Off

Connections Setup

Auto Select Play

DVD-Audio Out

Display

DolbyDigital

DTS

PCM

DTS

Display

Options

Speakers

MPEG

Speakers

i.LINK Setup

This screen shows the output settings for

Dolby Digital, DTS and MPEG audio.

Depending on the other component, these

may be configured automatically. If this

player can’t determine the appropriate

settings, the defaults are Dolby Digital, DTS

and PCM. If you need to change the settings,

move the cursor right and make the new

setting.

Change this setting to Off if the i.LINK inter-

face is still connected but you need to use one

of the other outputs. Changing this setting to

Off does not affect i.LINK thru data (i.e., if this

player is between two other i.LINK compo-

nents, it will still pass data between them).

Set back to On (i.LINK-ready) to be able to use

the i.LINK interface.

Connections Setup

Auto Select Play

You only need to make this setting if you

connected this player to other equipment

using the i.LINK interface.

• Default setting: Off

You only need to make this setting if you

connected this player to other equipment

using the i.LINK interface.

Initial Settings

Digital Audio Out

Video Output

Lingua

Audio Out

VSX-49TXi

VSX-AX10i

DV-47Ai

Initial Settings

Connections Setup

Auto Select Play

DVD-Audio Out

Digital Audio Out

Video Output

Lingua

Audio Out

Off

Display

Connections Setup

Auto Select Play

DVD-Audio Out

VSX-49TXi

VSX-AX10i

Options

Speakers

Display

i.LINK Setup

Options

Speakers

i.LINK Setup

This screen shows the equipment connected

using the i.LINK interface.

Components which are able to receive

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Initial Settings menu

Using this setting you can specify up to five

receivers to automatically switch input func-

tion to this player when you start playback of

a disc. Highlight a receiver from the list and

press ENTER.

DVD-Audio Out

• Default setting: 5.1 Channel

You only need to make this setting if you

connected this player to other equipment

using the i.LINK interface.

The most recently selected component is

marked with a orange box (ꢄ). The i.LINK

output when playing Dolby Digital, DTS or

MPEG discs will be as set for this component

(see also Connections Setup above).

Initial Settings

Digital Audio Out

Video Output

Lingua

Audio Out

2 Channel

Connections Setup

Auto Select Play

DVD-Audio Out

5.1 Channel

Display

Select Off to reset all the settings.

Options

Speakers

When the i.LINK connections are changed,

the following screen appears.

i.LINK Setup

Set this to 5.1 Channel to enjoy surround

sound when playing multichannel discs.

Initial Settings

Digital Audio Out

Video Output

Lingua

Audio Out

Off

To downmix a multichannel source when

using the i.LINK connection, set to 2 Channel

for stereo output.

Connections Setup

VSX-49TXi

Connections were changed

Auto Select Play VSA-AX10

and thus updated.

DVD-Audio Out

Display

Options

ENTER

Speakers

i.LINK Setup

Press ENTER to return to the menu screen.

• When set to 5.1 Channel, you’ll only get

sound from all speakers when playing

multichannel discs.

• Some DVD-Audio discs don’t allow down-

mixing of audio. These discs always

output multi-channel audio regardless of

the setting made here.

• Whether a receiver from the list has been

selected or not, this player will start play-

back when you change the input function

of the receiver to this player.

• Note that some AV receivers may not be

compatible with this feature.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Additional information

Chapter 9

Additional information

Storing discs

Taking care of your player and

discs

Although CDs and DVD discs are more

durable than vinyl records, you should still

take care to handle and store discs correctly.

When you're not using a disc, return it to its

case and store upright. Avoid leaving discs in

excessively cold, humid, or hot environments

(including under direct sunlight).

Handling discs

When holding discs of any type, take care not

to leave fingerprints, dirt or scratches on the

disc surface. Hold the disc by its edge or by

the center hole and edge.

Don’t glue paper or put stickers onto the disc,

or use a pencil, ball-point pen or other sharp-

tipped writing instrument. These could all

damage the disc.

Damaged or dirty discs can affect playback

performance. Take care also not to scratch

the label side of the disc. Although not as

fragile as the recorded side, scratches can

still result in a disc becoming unusable.

Should a disc become marked with finger-

prints, dust, etc., clean using a soft, dry cloth,

wiping the disc lightly from the center to the

outside edge as shown in the diagram below.

For more detailed care information see the

instructions that come with discs.

Do not load more than one disc into the player

at a time.

Discs to avoid

Discs spin at high speed inside the player. If

you can see that a disc is cracked, chipped,

warped, or otherwise damaged, don't risk

using it in your player—you could end up

damaging it.

Wipe lightly from the center of the disc

using straight strokes.

Don’t wipe the disc surface using circular

strokes.

If necessary, use a cloth soaked in alcohol, or

a commercially available CD/DVD cleaning kit

to clean a disc more thoroughly. Never use

benzine, thinner or other cleaning agents,

including products designed for cleaning

vinyl records.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Additional information

This player is designed for use with conven-

tional, fully circular discs only. Use of shaped

discs is not recommended for this product.

Pioneer disclaims all liability arising in

connection with the use of shaped discs.

• Place on a window sill or other place

where the player will be exposed to direct

sunlight.

• Use in an excessively dusty or damp envi-

ronment.

• Place directly on top of an amplifier, or

other component in your stereo system

that becomes hot in use.

Cleaning the pickup lens

The DVD player’s lens should not become

dirty in normal use, but if for some reason it

should malfunction due to dust or dirt,

consult your nearest Pioneer-authorized

service center. Although lens cleaners for CD

players are commercially available, we do not

recommend using them since some may

damage the lens.

• Use near a television or monitor as you

may experience interference—especially

if the television uses an indoor antenna.

• Use in a kitchen or other room where the

player may be exposed to smoke or steam.

• Use on a thick rug or carpet, or cover with

cloth—this may prevent proper cooling of

the unit.

Problems with condensation

• Place on an unstable surface, or one that

is not large enough to support all four of

the unit’s feet.

Condensation may form inside the player if it

is brought into a warm room from outside, or

if the temperature of the room rises quickly.

Although the condensation won’t damage the

player, it may temporarily impair its perfor-

mance. For this reason you should leave it to

adjust to the warmer temperature for about

an hour before switching on and using.

Moving the player

DV-59AVi – If you need to move the player, first

press the ꢂ STANDBY/ON button on the

remote to turn the player off. Wait for --OFF--

to disappear from the display, then switch off

the power by pressing POWER on the front

panel and unplug the power cable.

Hints on installation

We want you to enjoy using this product for

years to come, so please bear in mind the

following points when choosing a suitable

location for it:

DV-S969AVi – If you need to move the player,

first press ꢂ STANDBY/ON on the front

panel to turn the player off. Wait for --OFF-- to

disappear from the display, then unplug the

power cable.

Do...

Never lift or move the unit during playback—

discs rotate at a high speed and may be

damaged.

• Use in a well-ventilated room.

• Place on a solid, flat, level surface, such

as a table, shelf or stereo rack.

Power cable caution

Don’t...

Handle the power cable by the plug part. Do

not pull out the plug by tugging the cable, and

never touch the power cable when your hands

are wet, as this could cause a short circuit or

electric shock. Do not place the unit, a piece

• Use in a place exposed to high tempera-

tures or humidity, including near radia-

tors and other heat-generating

appliances.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Additional information

of furniture, or other object on the power

cable or pinch the cable in any other way.

Never make a knot in the cable or tie it with

other cables. The power cables should be

routed so that they are not likely to be stepped

on. A damaged power cable can cause a fire

or give you an electric shock. Check the power

cable once in a while. If you find it damaged,

ask your nearest Pioneer authorized service

center or your dealer for a replacement.

Set to 4:3 (Letter Box), widescreen discs are

shown with black bars top and bottom.

Set to 4:3 (Pan&Scan), widescreen discs are

shown with the left and right sides cropped.

Although the picture looks larger, you don’t

actually see the whole picture.

Screen sizes and disc formats

DVD-Video discs come in several different

screen aspect ratios, ranging from TV

programs, which are generally 4:3, to Cinema-

Scope widescreen movies, with an aspect

ratio of up to about 7:3.

Televisions, too, come in different aspect

ratios; ‘standard’ 4:3 and widescreen 16:9.

Please note that many widescreen discs over-

ride the player’s settings so that the disc is

shown in letter box format regardless of the

setting.

Widescreen TV users

If you have a widescreen TV, the TV Screen

setting (page 65) of this player should be set

to 16:9 (Wide).

When you watch discs recorded in 4:3 format,

you can use the TV controls to select how the

picture is presented. Your TV may offer

various zoom and stretch options; see the

instructions that came with your TV for

details.

• Using the 16:9 (Wide) setting with a stan-

dard 4:3 TV, or either of the 4:3 settings

with a widescreen TV, will result in a

distorted picture.

Resetting the player

Please note that some movie aspect ratios are

wider than 16:9, so even though you have a

widescreen TV, these discs will still play in a

‘letter box’ style with black bars at the top and

bottom of the screen.

Use this procedure to reset all the player’s

settings to the factory default.

Switch the player into standby.

Using the front panel buttons, hold

down the ꢄ (stop) button and press ꢂ

STANDBY/ON to switch the player back

on.

All the player’s settings are now reset, and

you should see the ‘Let’s Get Started’ screen.

Standard TV users

If you have a standard TV, the TV Screen

setting (page 65) of this player should be set

to 4:3 (Letter Box) or 4:3 (Pan&Scan),

depending on which you prefer.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Additional information

About the audio output settings

The table below shows how the audio settings you make in the Digital Audio Out and Audio

Output Mode screens (see Digital Audio Out settings on page 63 and Audio Output Mode on

page 75) affect the output from the 2 channel and the 5.1 channel analog outputs, and from the

optical/coaxial digital outputs with various types of disc.

Disc audio format

Player setting

Front L/R

Surround L/R

Digital outputs

analog outputs^*1Center, LFE, outputs^*1PCM convert^*2

Bitstream^*3

Dolby Digital

Left / Right

DTS

Dolby Digital

2 Ch

2ch downmix

Front L / R

–

2ch downmix

Left / Right

2ch downmix

Surround L/R,

Center, LFE

5.1 Ch

Dolby Digital

karaoke

2 Ch / 5.1 Ch

Left / Right

–

Linear PCM

DTS

2 Ch / 5.1 Ch

2 Ch

Left / Right

2ch downmix

Front L / R

–

Surround L/R,

Center, LFE

5.1 Ch

MPEG

2 Ch / 5.1 Ch

2 Ch

Left / Right

2ch downmix^*4

Front L / R

–

Left / Right

2ch downmix^*5

–

MPEG

DVD-Audio

2ch downmix^*5

–

Surround L/R,

Center, LFE

5.1 Ch

DVD-RW

2 Ch / 5.1 Ch

Left / Right^*6

–

Left / Right

Dolby Digital

MPEG or PCM

Super Audio CD

2 Ch

2ch downmix

Front L / R

–

Surround L/R,

Center, LFE

5.1 Ch

2 Ch / 5.1 Ch

2 Ch

Left / Right

2ch downmix

Front L / R

–

Left / Right

DTS

Left / Right

DTS

DTS CD

Surround L/R,

Center, LFE

5.1 Ch

Video CD

2 Ch / 5.1 Ch

Left / Right

–

Left / Right

* When Audio Output Mode is set to 2 Channel, the AUDIO OUT (5.1ch) FRONT L / R jacks

act as a second pair of stereo audio outputs.

* Dolby Digital > PCM, MPEG > PCM or DTS > PCM setting (see Digital Audio Out settings

on page 63)

* Dolby Digital, MPEG or DTS setting (see Digital Audio Out settings on page 63)

* Discs that prohibit downmixing will be output as 5.1 channel even if 2 Channel is selected

as the Audio Output Mode setting (see Audio Output Mode on page 75)

* Discs that prohibit downmixing also mute the digital output

* If the sound is mono, the Left and Right channels will be the same

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Additional information

About the HDMI output settings

The table below shows how the audio settings you make in the HDMI and Audio Output Mode

screens (see HDMI Settings on page 73 and Audio Output Mode on page 75) affect the HDMI

output with various types of disc.

HDMI Audio Setting

LPCM

Disc audio format

Auto

Dolby Digital^*

2 ch downmix

Left / Right

Dolby Digital^*2

Left / Right

DTS^*2

Dolby Digital (Karaoke)

Linear PCM^*

Left / Right

DTS

2 ch downmix

Left / Right

MPEG^*

MPEG^*2

DVD-Audio (with CPPM)

DVD-Audio (without CPPM)

CD / MP3

No sound^*

2 ch downmix^*

Left / Right

DTS

DTS CD

Video CD

Left / Right

SACD Playback

2 ch Area

Multi-ch Area

CD Area

Super Audio CD

––– ^*

Left / Right^*6

* These formats include DVD-RW discs.

* If the HDMI device you are using is not compatible with these compressed formats, the signal

is output as linear PCM.

* It is not possible to output DVD-Audio sources from the HDMI connection if they are copy-

controlled using CPPM.

* Multichannel discs that prohibit downmixing will not be output even if 2 Channel is selected

as the Audio Output Mode setting (see Audio Output Mode on page 75).

* It is not possible to listen to SACDs using the HDMI connection.

* Only applicable to discs that have a CD area.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Additional information

About the i.LINK output settings

The table below shows how the audio settings you make in the SACD Playback, DVD-Audio

Out and Connections Setup screens (see SACD Playback on page 73, DVD-Audio Out on

page 80 and Connections Setup on page 79) affect the i.LINK audio output with various types of

disc.

Disc audio format

Connections Setup

Bitstream > PCM^*

2 ch downmix

Left / Right

Bitstream^*

Dolby Digital

Left / Right

DTS

Dolby Digital (Karaoke)

Linear PCM

Left / Right

DTS

2 ch downmix

Left / Right

MPEG

DVD-RW (mono, dual mono, 2ch)

DVD-RW (3ch or more)

Left / Right

Dolby Digital / MPEG

Left / Right

DVD-Audio Out

2 Channel

5.1 Channel

DVD-Audio

CD / MP3

DTS CD

2 ch downmix

Multi-channel

Left / Right

DTS

Video CD

Left / Right

SACD Playback

2 ch Area

Multi-ch Area

Multi-channel^*

CD Area

Left / Right^*

Super Audio CD

Left / Right

* Dolby Digital, DTS or MPEG setting (see Connections Setup on page 79)

* PCM setting (see Connections Setup on page 79)

* Only applicable to discs that have a multichannel area.

* Only applicable to discs that have a CD area.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Additional information

Watching NTSC on a PAL TV

Most models of the newly developed count-

down PAL TV system detect 50 Hz (PAL)/60 Hz

(NTSC) and automatically switch vertical

amplitude, resulting in a display without

vertical shrinkage.

Setting the TV System

DV-S969AVi only

The default setting of this player is AUTO, and

unless you notice that the picture is distorted

when playing some discs, you should leave it

set to AUTO. If you experience picture distor-

tion with some discs, set the TV system to

match your country or region’s system. Doing

this, however, may restrict the kinds of disc

you can watch. The table below shows what

kinds of disc are compatible with each setting

(AUTO, PAL and NTSC).

If your PAL TV does not have a V-Hold control,

you may not be able to watch NTSC discs

because of picture roll. If the TV has a V-Hold

control, adjust it until the picture stops

rolling.

On some TVs, the picture may shrink verti-

cally, leaving black bands at the top and

bottom of the screen. This is not a malfunc-

tion; it is caused by the NTSC to PAL conver-

sion.

If the player is not plugged in, plug it

in now, but leave it in standby.

Using the front panel controls, hold

down ꢇ ꢈ then press ꢂ STANDBY/ON

to switch the TV system.

The TV system changes as follows:

AUTO ꢀ NTSC

NTSC ꢀ PAL

PAL ꢀ AUTO

The player’s display indicates the new setting.

• You have to switch the player into standby

(press ꢂ STANDBY/ON) before each

change.

• If you’re watching an NTSC disc on a PAL

TV, you will only be able to see interlace

video. Progressive scan video is not

compatible with the MOD.PAL setting.

Disc

Player setting

Format NTSC PAL

NTSC NTSC MOD.PAL NTSC

PAL PAL PAL PAL

NTSC NTSC MOD.PAL NTSC

Type

AUTO

DVD

Video CD

CD / no disc

PAL

–

NTSC

PAL

NTSC or PAL

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Additional information

Lingua code list

Lingua (Lingua code letter), Lingua code

Japanese (ja), 1001

IT (en), 0514

French (fr), 0618

German (de), 0405

Italian (it), 0920

Spanish (es), 0519

Dutch (nl), 1412

Russian (ru), 1821

Chinese (zh), 2608

Korean (ko), 1115

Greek (el), 0512

Estonian (et), 0520

Basque (eu), 0521

Persian (fa), 0601

Finnish (fi), 0609

Fiji (fj), 0610

Faroese (fo), 0615

Frisian (fy), 0625

Lingala (ln), 1214

Slovak (sk), 1911

Slovenian (sl), 1912

Samoan (sm), 1913

Shona (sn), 1914

Somali (so), 1915

Albanian (sq), 1917

Serbian (sr), 1918

Siswati (ss), 1919

Sesotho (st), 1920

Sundanese (su), 1921

Swedish (sv), 1922

Swahili (sw), 1923

Tamil (ta), 2001

Laothian (lo), 1215

Lithuanian (lt), 1220

Latvian (lv), 1222

Malagasy (mg), 1307

Maori (mi), 1309

Macedonian (mk), 1311

Malayalam (ml), 1312

Mongolian (mn), 1314

Moldavian (mo), 1315

Marathi (mr), 1318

Malay (ms), 1319

Maltese (mt), 1320

Burmese (my), 1325

Nauru (na), 1401

Irish (ga), 0701

Scots-Gaelic (gd), 0704

Galician (gl), 0712

Guarani (gn), 0714

Gujarati (gu), 0721

Hausa (ha), 0801

Hindi (hi), 0809

Croatian (hr), 0818

Hungarian (hu), 0821

Armenian (hy), 0825

Interlingua (ia), 0901

Interlingue (ie), 0905

Inupiak (ik), 0911

Indonesian (in), 0914

Icelandic (is), 0919

Hebrew (iw), 0923

Yiddish (ji), 1009

Javanese (jw), 1023

Georgian (ka), 1101

Kazakh (kk), 1111

Greenlandic (kl), 1112

Cambodian (km), 1113

Kannada (kn), 1114

Kashmiri (ks), 1119

Kurdish (ku), 1121

Kirghiz (ky), 1125

Latin (la), 1201

Afar (aa), 0101

Abkhazian (ab), 0102

Afrikaans (af), 0106

Amharic (am), 0113

Arabic (ar), 0118

Assamese (as), 0119

Aymara (ay), 0125

Azerbaijani (az), 0126

Bashkir (ba), 0201

Byelorussian (be), 0205

Bulgarian (bg), 0207

Bihari (bh), 0208

Bislama (bi), 0209

Bengali (bn), 0214

Tibetan (bo), 0215

Breton (br), 0218

Catalan (ca), 0301

Corsican (co), 0315

Czech (cs), 0319

Telugu (te), 2005

Tajik (tg), 2007

Thai (th), 2008

Nepali (ne), 1405

Norwegian (no), 1415

Occitan (oc), 1503

Oromo (om), 1513

Oriya (or), 1518

Panjabi (pa), 1601

Polish (pl), 1612

Pashto, Pushto (ps), 1619

Portuguese (pt), 1620

Quechua (qu), 1721

Rhaeto-Romance (rm), 1813 Ukrainian (uk), 2111

Kirundi (rn), 1814

Romanian (ro), 1815

Kinyarwanda (rw), 1823

Sanskrit (sa), 1901

Sindhi (sd), 1904

Tigrinya (ti), 2009

Turkmen (tk), 2011

Tagalog (tl), 2012

Setswana (tn), 2014

Tonga (to), 2015

Turkish (tr), 2018

Tsonga (ts), 2019

Tatar (tt), 2020

Twi (tw), 2023

Urdu (ur), 2118

Uzbek (uz), 2126

Vietnamese (vi), 2209

Volapük (vo), 2215

Wolof (wo), 2315

Xhosa (xh), 2408

Yoruba (yo), 2515

Zulu (zu), 2621

Welsh (cy), 0325

Danish (da), 0401

Bhutani (dz), 0426

Esperanto (eo), 0515

Sangho (sg), 1907

Serbo-Croatian (sh), 1908

Sinhalese (si), 1909

Country code list

Country, Country code, Country code letter

Argentina, 0118, ar

Australia, 0121, au

Austria, 0120, at

Belgium, 0205, be

Brazil, 0218, br

Canada, 0301, ca

Chile, 0312, cl

China, 0314, cn

Denmark, 0411, dk

Finland, 0609, fi

France, 0618, fr

Germany, 0405, de

Hong Kong, 0811, hk

India, 0914, in

Indonesia, 0904, id

Italy, 0920, it

Japan, 1016, jp

Korea, Republic of, 1118, kr

Malaysia, 1325, my

Mexico, 1324, mx

Netherlands, 1412, nl

New Zealand, 1426, nz

Norway, 1415, no

Pakistan, 1611, pk

Philippines, 1608, ph

Portugal, 1620, pt

Russian Federation, 1821, ru

Singapore, 1907, sg

Spain, 0519, es

Switzerland, 0308, ch

Sweden, 1905, se

Taiwan, 2023, tw

Thailand, 2008, th

United Kingdom, 0702, gb

United States of America, 2119, us

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Additional information

Browsable pictures (DVD-Audio only)

A feature of some DVD-Audio discs in which

the user can browse still pictures recorded on

the disc as the audio is played. See also

Slideshow.

Selecting languages using the

language code list

Some of the language options (such as ‘DVD

Lingua’ in the Setup Navigator) allow you

to set your preferred language from any of the

136 languages listed in the language code list

on page 88.

Digital audio

An indirect representation of sound by

numbers. During recording, the sound is

measured at discrete intervals (44,100 times a

second for CD audio) by an analog-to-digital

converter, generating a stream of numbers.

On playback, a digital-to-analog converter

generates an analog signal based on these

numbers. See also Sampling frequency and

Analog audio.

Select ‘Other Lingua’.

Use the Joystick (left/right) to select

either a code letter or a code number.

Use the Joystick (up/down) to select a

code letter or a code number.

• You can also use the number buttons if

you’re entering a language code.

See Lingua code list on page 88 for a

complete list of languages and codes.

Dolby Digital

Glossary

Using a maximum of 5.1 channels of audio,

this high quality surround system is used in

many of the finer movie theaters around the

world.

Analog audio

An electrical signal that directly represents

sound. Compare this to digital audio which

can be an electrical signal, but is an indirect

representation of sound. See also Digital

audio.

The on-screen display shows which channels

are active, for example showing 3/2.1. The 3

being the two front channels and the center

channel; the 2 being the surround channels,

and the .1 being the LFE channel.

Aspect ratio

The width of a TV screen relative to its height.

Conventional TVs are 4:3 (in other words, the

screen is almost square); widescreen models

are 16:9 (the screen is almost twice as wide as

it is high).

DTS

DTS stands for Digital Theater Systems. DTS

is a surround system different from Dolby

Digital that has become a popular surround

sound format for movies.

Bonus Group (DVD-Audio only)

An ‘extra’ group on some DVD-Audio discs

that requires a key number to access.

Scarica from Www.Somanuals.com. All Manuals Search And Scarica.

Additional information

Dynamic range

MP3

The difference between the quietest and

loudest sounds possible in an audio signal

(without distorting or getting lost in noise).

Dolby Digital and DTS soundtracks are

capable of a very wide dynamic range, deliv-

ering dramatic cinema-like effects.

MP3 (MPEG1 audio layer 3) is a compressed

audio file format. Files are recognized by their

file extension “.mp3” or “.MP3”.

MPEG audio

An audio format used on Video CD/Super

VCDs and some DVD discs. This unit can

convert MPEG audio to PCM format for wider

compatibility with digital recorders and AV

amplifiers. See also PCM (Pulse Code Modula-

tion).

File extension

A tag added to the end of a filename to indi-

cate the type of file. For example, “.mp3” indi-

cates an MP3 file.

i.LINK

MPEG video

i.LINK is a trademark name of IEEE1394, a

high-speed digital interface capable of

carrying audio, video and other types of data

(this player only outputs audio).

The video format used for Video CD/Super

VCDs and DVDs. Video CD/Super VCD uses

the older MPEG-1 standard, while DVD uses

the newer and much better quality MPEG-2

standard.

HDMI

Packed PCM (DVD-Audio only)

HDMI (High-Definition Multimedia Interface)

is a high-speed digital interface which has the

capability to support standard, enhanced, or

high-definition video plus standard to multi-

channel surround-sound audio on a single

digital connection. HDMI features include

uncompressed digital video, a bandwidth of

up to 5 gigabytes per second and communi-

cation between the AV source and AV devices

such as DTVs.

A lossless compression system that enables

more PCM audio to be stored on a DVD-Audio

disc than would otherwise be possible.

PBC (PlayBack Control) (Video CD/Super

VCD only)

A system of navigating a Video CD/Super VCD

through on-screen menus recorded onto the

disc. Especially good for discs that you would

normally not watch from beginning to end all

at once—karaoke discs, for example.

HDMI, the HDMI logo and High-Definition

Multimedia Interface are trademarks or regis-

tered trademarks of HDMI licensing LLC.

PCM (Pulse Code Modulation)

Interlaced video

The most common system of encoding digital

audio, found on CDs and DAT. Excellent

quality, but requires a lot of data compared to

formats such as Dolby Digital and MPEG

audio. For compatibility with digital audio

recorders (CD, MD and DAT) and AV ampli-

fiers with digital inputs, this unit can convert

Dolby Digital, DTS and MPEG audio to PCM.